shavermcspud

Register on the victron site and enter the remote code in to the Venus OS then you have cloud access.

You cant use the Pylon protocol from Seplos to the Solis, Use either AoBo on the inverter of the default setting. The BMS will handle...

Hi, we install these daily and they do get noisy on full chat. the solution is rubber tiles installed between the rear mount bracket and...

Heck that's nothing. I run my house, power the neighborhood, mine thousands of Bitcoins, run an illegal grow operation, and still have...

Poor quality low cost breaker, replace with Bussmann/Blue sea, Example, https://www.ebay.com/itm/395209237520

Alcohol isn't the answer. Alcohol is the question. The answer is "yes!"

Although as others have said its probably not worth while, however if you do go for it, if the Turbine comes with an "A/C inverter as...

TN-C-S is a combined N to PE at the point of supply plus PME along the supply line. As @SeaGal has stated you will require a separate...

I'm not a sparky, but IMHO you will need an earth-rod to provide earth on your backup CU, provide N-E bonding if the Sunsynk does not...

Congratulations, you've discovered inverter idle consumption.

I do have the firmware specific for the SPH series and Seplos BMS if you want it, i will add that you do so at your own risk flashing...

Does it currently communicate with the inverter via the PCS port ok? if so it has already been flashed.

Have you flashed the firmware of your Seplos unit to be compatible with the SPH series so that can comms works ok?

@shavermcspud Thanks a lot for your response. That would save me $100+ if I only need 1. I would then just be concerned that if there's...

Point F would be the most logical place, as its the combined end point for both negative leads from both battery packs.

Surely the same amount of energy has to be transferred doing 4x cells individually or 4x in parallel?

Its working fine now, and has been on point ever since, within 0.5% of my Victron shunt in terms of SOC and current in/out

The soc seems to be fixed now after several more days. But agree not great that the product doesn't do something as simple as correct...

Ublock origin for all things.

As UK registered MCS installer, Electrician and Napit certified person, a few things to point out in your diagram above, You can't have...