Recent content by ShockinglyAverage

Also I have checked the voltage and resistances. You’re just wrong. I know that’s painful to admit sometimes, I’ve been there. But the panel is not bonded and the inverter is not dynamically binding anything. When I ground it at the plug, the voltages read proper, from both the inverter and on...

It’s not touching it’s just the perspective

Just for the record, THIS is my panels diagram not the one you keep sharing.

If these units work as perfectly as you claim then why are there literally dozens of threads and YouTube videos about how to deal with the problem I laid out? Is my breaker panel OCD compliant? No. But it is perfectly safe and I have consulted with Paneltronics and can confirm it is wired...

Any threads or sources about the relay solution you can point me to? Appreciate all the help.

Ahh, I see. So which do you guys think would be a better option: 1) the plug mentioned above. Pro, you would have to remove it in order to plug into shore power so no chance of double bonding. Con, the only option for the 30amp twist lock on the back of my van would be a bulky 5” long female...

So this was my conversation with the seller watts247 (I don’t know if this is Ian specifically). Does this make any sense? I’m not even 100% sure what he’s suggesting in the last message. Does nobody in a mobile setup like van or rv really use this unit without some weird Jerry rigging?

Here are the terminals for the growatt. This is after the jumper wire which is why you can (kind of) see two white wires going into each neutral terminal. The other picture is the Paneltronics breaker panel. Looks a mess I know but all the wires are correctly and securely attached. Also if it...

Please forgive my ignorance, AIO? Just for clarity this is in a van conversion, if that changes what you want to see.

So I've gone through the various threads that seem to relate to this problem and I still can't seem to fix it. When AC is passing through from the utility its fine, all my outlets test good. When I use the inverter to generate the AC my Paneltronics breaker panel would like up "reversed...

Thank you so much!

I know this is years old but this is the best description of my problem so I was curious if you could send me a picture of your solution. Is it just as simple as a small piece of wire connecting the two neutral terminals together along with the normal in/out cables?

I have this exact same problem. Was there a fix for it?

I’m having this issue also. Curious if anyone has ever gotten an answer.

I'm not really sure what "based on" means exactly but the onw I got from Minerals has Jikong printed right on the bms and uses the JK app, so if it's not a legit JK bms they did a great job "basing it on it." Lol