-
-
Ssolardad reacted to houseofancients's post in the thread Seplos Mason DIY kit review (4/5) with
Like.
If you do find something like , please do share :) -
Ssolardad replied to the thread Simple Seplos BMS Protocol Decode Bash Script.Great stuff..! Wondering if anyone was able to interrogate the BT connection with the V2 / 10E version of the BMS? So instead of polling...
-
Ssolardad reacted to peppebytes's post in the thread Simple Seplos BMS Protocol Decode Bash Script with Like.
Hi @sidepipe i wrote a script that use your modified script to send data to home assistant, can i publish it on github to help other...
-
Ssolardad replied to the thread Seplos Mason DIY kit review (4/5).Yeah that is the limitation that I referenced going via rs485. I was hoping someone was able to do something similar to this project...
-
Ssolardad replied to the thread Seplos Mason DIY kit review (4/5).Has anyone had luck in monitoring the data from the BMS ver (v2/10e) in Home Assistant when you have multiple packs, master / slave(s)...
-
Ssolardad posted the thread Seplos - lacking customer support in Solar Equipment Vendor Review Corner.PSA on doing business with Seplos. Purchased five mason 280AH kits with V2 lcd Bluetooth support. All kits were shipped with...
-
SYeah, I just checked my Alibaba order with Adam Han of Seplos for my Dec 2022 order. The 280AH connecters were $16 per set, and the...
-
Ssolardad replied to the thread Seplos Mason DIY kit review (4/5).Well I am waiting for a human to review my request but the online quote from Selpos through their Alibaba store front is $143 for 3...
-
Ssolardad replied to the thread Seplos Mason DIY kit review (4/5).Do you have a link to what you ordered? The distance between mounting holes on the Mason 280a kit is 21mm which I have been unable to...
-
Ssolardad replied to the thread Seplos Mason DIY kit review (4/5).Ugh - bought the wrong battery connector. I did not realize the snap on connector is not universal on the mason kit even through it has...
-
-
Ssolardad reacted to upnorthandpersonal's post in the thread 20% capacity loss and bulging after 2.5 years of use with Like.
Charging at those temperatures will destroy LFP fast. Cells shouldn't bulge - that means something goes wrong during charging (cell...
-
SI think we all pretty much just have an "I'll believe when I see it" approach to these new battery announcements.
-
Ssolardad replied to the thread Seplos Mason DIY kit review (4/5).Good question, I would have not thought about it until I caught up on this thread and the potential issue a mega fuse with this melt...
-
Ssolardad replied to the thread Seplos Mason DIY kit review (4/5).Fuses…. So the 400amp fuse that comes with the Seplos v2 (10e) looks questionable to me… has any one upgraded the fuse to a t-class...
-
SThis is an older post but I have just installed power switches on my units and wanted to add a few pictures.. You need a latching power...
-
Ssolardad reacted to parody's post in the thread Seplos bms 3.0 multi battery pack monitoring (MQTT & Home Assistant) with Like.
I was just about to get stuck into writing this exact thing... then found yours! Thanks so much @multimake for your work on this. I...
-
Ssolardad reacted to JCSchwarb's post in the thread Battery to Inverter Interconnect Combiner Design (battery Terminal busbar (buss bar) and circuit breaker) Housing with Like.
After seeing folks struggle with how to connect battery racks to busbars (buss bars) and circuit breakers, I share my Battery...
-
SI have two stacked on top of each other on slighly modified (I cut the front off) Dominoes Pizza trolley. Works a treat. The Mason fits...
-
Ssolardad reacted to houseofancients's post in the thread Seplos Mason DIY kit review (4/5) with Like.
request a swap
-
Ssolardad replied to the thread Seplos Mason DIY kit review (4/5).So this is weird. When setting up the 1st pack the LCD would always show 0 volts as if the wires were not connected corrected. So I...
-
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…
