Good evening,
One of the pc fans in my inverter stopped working so i ordered a replacement but it came with a different connector and the wire order and colors are different.
Here are some photos, New on LEFT Old on RIGHT
The old fan was wired Blue (4), Yellow (3), Red (2), Black (1)
The new...
https://www.amazon.com/CAQL-Delta-AFB0812SH-PWM-AFB0812SH-SM26-Connector/dp/B091P79C7S/ref=sr_1_3?crid=2ZXFTOO916L2Q&keywords=80+x+25+fan+4+pin+4500+rpm&qid=1659392780&sprefix=80+x+25+fan+4+pin+4500+rpm%2Caps%2C210&sr=8-3
This is the most suitable i have found! looks the same specs just 0.1A...
Yes it has a 4 pin connector.
Size: 80 * 80 * 25MM
Bearing: Hydraulic
Service life: 60000 hours (continuous operation)
Voltage: 12V
Current: 0.70a
Speed: 800-4500 ± 5%RPM
Interface: mainboard 4Pin (support PWM speed regulation)
What is this information? is this the specs on my fan?
this...
Here is a photo of the fan, it says 12v 0.7A. I gave it the best clean i could with the tools i have available but no luck. I am looking for a new one, i will send an email to growatt and hopefully they have one for me if not i will have to look around!
I have a growatt 3k inverter which started showing error code 1 which is fan lock, when I opened it u one fan is jittering and not working. Everything is very dusty inside so I would like to do a clean to see if that fixes the fan. any recommendations on how to do it would be lovely. I was...
Hey guys, on Monday I got hit by a level 2 hurricane and my Growatt inverter got alittle wet. When I opened it up I could only see a little water on the display and the buttons for the settings. The main components all looked dry. It has been air drying for 4 days. Am I stupid to want to turn it...
At the moment i am getting quotes for a new battery bank and quotes for connecting to the grid so at the moment i dont know how much longer i will be using the system like this
I have a HA02 Battery equalizer to connect to my bank of 4x 12v 205aH FLD lead acid batteries, One of them is dead so i turned down my CC and CV by 2v and it seems to be keeping the dead battery at 11 and the other ones are arriving to the correct voltages, nothing is over charging. Will it...
I have the same thing my manual didn't come with information for those setting numbers, if you find the user manual online it will have the information for the setting number 43-48. Another thing is that on the Shineapp it lets you set the voltages until 62v instead of 58.6v like the manual says.