-
-
SSimple question - which specification earthing cable is recommended for 8 PVs - 2kw. I plan to run via lugs down to a stake in the...
-
Sspacebicuit replied to the thread Inverter Help.Thanks - I tried the sunny design software - when I try the polystring configuration it will only allow me to add the 2nd array with the...
-
SMy setup consists of 8 250W Sanyo PV and a SunnyBoy 1700 Inverter. I have 6 PV mounted on a flat roof in tubs facing South - they work...
-
Sspacebicuit replied to the thread Microinverter Help.I'm ready to add my 2nd array to my grid generation meter. I've checked the documentation for each inverter: Sunny Boy (6 panel array)...
-
Sspacebicuit replied to the thread PV Earth.So a lug screwed and held between the washer and bird wire to my earthing point for each row?
-
Sspacebicuit replied to the thread PV Earth.What is the main panel in this context? Please see my setup in the photos below, I have drilled the panels to add bird protection...
-
-
SShould an array PVs be earthed. I have 6 mounted on plastic tubs on a flat roof and 2 on a pitched roof, 2 distinct strings. Internally...
-
Sspacebicuit replied to the thread Microinverter Help.Just noticed something - my main inverter has two DC inputs. I'm trying to establish if this will enable me to use 2 separate strings...
-
Sspacebicuit replied to the thread Microinverter Help.On the isolator switch there is a sticker that reads: AC1 20amp AC22 15amp Does that help?
-
Sspacebicuit replied to the thread Microinverter Help.About the panels - these are clearly marked positive and negative so I know their polarity. so the question is more about the polarity...
-
Sspacebicuit replied to the thread Microinverter Help.I've been busy adding bird protection to my main string, today I managed to mount the 2 remaining panels which will make up the second...
-
-
Sspacebicuit replied to the thread PVOutput.I figured it out - on the "Device Managers" tab of PV Bean, for the SMA Manager" for Sunny Explorer there is a collapsible element where...
-
Sspacebicuit replied to the thread PVOutput.Thanks I had seen that thread when i was Googling the issue. In my case if i close Sunny Explorer and double click the plant file which...
-
SIs anyone able to help with exporting generation data to PVOutput? I am using PV Bean and Sunny Explorer to connect to my inverter via...
-
SIs it safe to drill through the metal frame of a solar panel? When tapped it eachs as if it is hollow. I'm need to add bird protection...
-
-
Sspacebicuit replied to the thread Microinverter Help.I've cut the old MC3 cables off and crimped my own MC4 - 6 panels of the original string are online and generating I believe - waiting...
-
Sspacebicuit replied to the thread Microinverter Help.The Ecoflow microinverter arrived yesterday, the packaging is very impressive - a bit like unboxing a new iphone! Next challenge - I...
-
SYo can connect two panels in paralel and then to one input of microinverter. My system is composed like this and it works fine:)
-
Sspacebicuit replied to the thread Microinverter Help.Yeah for the price differential it is not worth scrimping for a few quid. Just want to check that there is not a drawback to using a...
-
Sspacebicuit replied to the thread Microinverter Help.I've run the cables outside under a tile but they do not reach my solar panels so I need an extension. The panels themselves use the old...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
