Most reacted posts

So it appears that I only had the charging voltage set to 54v. I increased it to 57v and I was able to get the amps up to 94a on the output. Appreciate your time answering.

I’ll see if I can get to trying it again this weekend, and report back.

LFP-51.2v100Ah-v1.0 Z02T15 I tried to upgrade them to Z02T18, but I was only able to get the RS485 firmware to apply. When trying to run the RS232, it was failing with: Initialization failed, please check BMS connection Clear Flash failed, Please Update again I was using the USB cable that...

I am now showing information for the batteries in the monitor. Before I posted my previous reply, it still wasn’t showing but now it is. Still not sure if I need to try and apply the RS232 update.

Does your SA connection to the 6000xp stay connected or does it cycle off and on? Mine connects for a bit and then disconnects for a bit then reconnects for about 2-3sec and disconnects again.

I have a 6000xp and I don’t see any options for seeing the batteries in the app. I have two LL batteries which I can see 200ah under battery icon, but no actual battery information nor individual battery data. My inverter is on ccaa-190D0E

I was trying out my generator with the EG4 Chargeverter 5k, second version. My generator has a running watt of 9500 and a 30am 240v 14-30 connector. I checked my extension cord and I get 120v on both legs and 240v across. My chargeverter is just reading the battery voltage as I didn’t switch the...

It was last weekend but I believe the battery voltage was around 51v and I set it to stop at 54v if memory is working.

What is the ideal max voltage to set it to?

I guess I only got the RS485 and not the RS232 cable then. I only have one USB to ethernet cable.

I had also turned off my solar to make sure only the chargeverter was supplying current back to the batteries. Again this was a test for my gen and also first test of the chargeverter.