TedH's latest activity

Well, everyone has https://solar-assistant.io/ contact info at the bottom of the page: info@solar-assistant.io

I am currently reaching out to folks that are writing Venus OS drivers to interrogate using TTL Communications protocol. Most are BMS...

If you have the SA contact info, I'll reach out to them with the Aims TTL Communications protocol document to see if they can adapt to...

Can your driver be adapted to run in Venus OS (on Raspberry Pi 4B) to interrogate inverter/charger from Aims Power and display this info...

This is impressive. I'll check out Iotawatt also.

Can your driver be adapted to interact with any TTL device using TTL communications protocol? I am asking as I have a document from...

Thanks. I'm printing the info.

It may be possible - according to this post Aims will share the protocol information. You may have some coding to do...

Looks like I would need to write code. SA doesn't talk Aims inverter/charger.

Has anybody explored or set up a data logging hat on Raspberry Pi 4B to collect data from an ethernet cable? I want to log data from...

Agreed. I see the SolarEdge compatible solutions have a $$$ premium that hurts my wallet :D

System design has to be based on whether your not you wanted the SolarEdge system to continue operating when the grid is down. If so...

I am also considering a 'less DIY' solution around my Aims inverter/charger and an enclosed rack of six, 24v, 5kW Lifepower case power...

There is absolutely No Problem with having 6 LFP battery packs in parallel. The best way is to connect them all to a common DC Bus by...

To keep all things equal, I would carry on the connection in parallel add the two 100ah batteries into the mix of 4, 100ah batteries in...

What battery manufacturer? That may be a restriction. Does each battery have an internal bms? Is each battery a 12v case? If...

SunRun installed a 9.2kW rooftop (7.6kW inverter) system for $42K. They will upsell name-brand battery banks for serious coin. I'm...