Texas-Mark's latest activity

Sounds like that came straight out of the sales pamphlet. Or warranty instructions.

They all have a little damage. Mostly the corner cell is cracked. The bad one has a "burn spot" on one cell more toward the middle. So...

I can sort of answer these. I have one of those handheld panel tester meters. So that is how I am seeing the output wattage. I did not...

Would that not give the same results as 2S2P? The "bad" panel will still ultimately be in series with good ones, and thus limiting the...

I can do that, but before I go building more cables, I just wanted to know if there is any advantage to going with the 2S2P that "might"...

This will be a small stand alone system that I won't be adding any more panels to. I have four 300 watt panels. Due to the voltage...

Manufactured demand? lol I do hold it when I am going to put it in. Aesthetics for those that have vintage fixtures. Not sure why that...

No, he is not the only one. As noted, just because something is not important you you, does not mean it's not important to someone else...

You could say that about most thread posts on the forum. If YOU don’t care just move on to the next thread. Those who DO care can...

Are you saying you are trying to run that pump directly off of that one panel?

Not getting into an argument with the OP, but for benefit of others that come across this thread, I've had three Emporia Vue monitors in...

Not just talking about immediate protection, a smaller generator will bog down and then may cause something to trip. I know mine grunts...

Ok i finally decided to do some math and put this old wives' tale to rest: 4 ton compressor has 3.5 Kg of copper. Specific heat...

But how much time are we talking about? A few extra milliseconds? A HVAC by nature is self cooling so I’m not sure if a second of...

Why not go into detail if you think the concerns are valid? The main reason I will be getting one is to make it easier for my generator...

That appears to be a panel with USB ports built onto it, not a stand-alone panel.

Not sure about your wind generator, but you only have 1200W of solar for a 840Ah battery. Even your generator at 25A into the battery...

Yes for the first No for the second. I really think the issue is that you never fully charged the battery. The difference between 40%...

At 12.9 volts you are at about 20% SOC.

Sounds like it was not charged to 100% if you were going by voltage change.