diy solar

diy solar

Most reacted posts

  • Post in thread: EG4 6000 XP general questions

    JL Hut I used 6 AWG wire and did not have a problem. I know its more than they suggest but my electrician REALLY suggested 6 AWG.
  • Post in thread: EG4 3000 v2 back to battery 60% minimum

    I am asking them to put out a firmware now for a lower threshold of 50% which is still high but more reasonable.
  • Post in thread: EG4 LifePower4 Batteries bad SOC issues

    SolarUser - firmware is the latest 3.37 on every battery - I check every week on my tech call with signature solar. The firmware on the 6000XP is the latest ccaa-180C0D - the 18k has newer firmware but not the 6k. EG4 Jared - the signature solar tech set charging to 58V and was trying to 3.55...
  • Post in thread: EG4 3000 monitoring with Home Assistant

    Is it possible to do even basic monitoring via Home Assistant of the EG4 3000? I see people buying Solar Assistant and then monitoring that but can you not do basic monitoring of it via MQTT or some such directly in home assistant?
  • Post in thread: EG4 3000 v2 back to battery 60% minimum

    Yep have all that configured.. I use alot of power in the morning and my old Growatt let me set the percentage to set to use battery for loads as low as I want - that way I could use the morning incoming solar for loads and only use the extra to charge the battery - which is what I want. This...
  • Post in thread: DeWalt 4500lb shelving $119 home Depot

    Comes up as $204.97 for me.
  • Post in thread: EG4 LifePower4 Batteries bad SOC issues

    Hello all! I have been working with signature Solar for months trying to get the SOC working on my 3 Lifepower4 batteries in the EG4 rack. I have the EG4 6000XP inverter and in voltage mode all works great! Goes down to 47V and up to 55V no problem. But we have been trying to get it to work...
  • Post in thread: Eg4 3000 ehv-48 Inverter / charger PV Input Question

    FYI if this inverter doesn't work for you the Growatt 3000 LVM will handle 150 VOC and up to 80 amps! ;)
  • Post in thread: EG4 3000 v2 back to battery 60% minimum

    Hey all - just got one of the new EG4 3000 v2 inverters (connected to EG4 LifePower 4 rack battery) and the lowest it will let me set it to use battery power for loads is 60%????? Thats CRAZY high! My old Growatt 3000 you could set it anywhere above the minimum utility power. Is there any way...
  • Post in thread: Epever XTRA4415N MPPT Solar Charge Controller to EG4 48v 100Ah Lifepo4 Server Rack Battery and also DC Load to EcoFlow Delta Max

    Hello! My current system is an Ecoflow Delta Max 2000 connected to (4) SolarEver 410W Panels in a 2S2P config - ea panel is 38.1 VOC, 13 amp so each serial pair is around 75VDC then both strings connected in parallel to the Ecoflow - works like a champ! This first system was a test since I have...
  • Post in thread: EG4 3000 v2 back to battery 60% minimum

    IS there any reason the EG4 3000 needs 60% battery power to start using battery for loads? Thats super high! Thanks!
Back
Top