T
Reaction score
95

Latest activity Postings About Most reacted threads Most reacted posts

    • T
      tinyt reacted to rogerdw's post in the thread Warpverter with Like Like.
      I've been following this thread with interest and wondered if anyone might want to see my efforts at building a Warpverter. It's been a...
    • T
      tinyt replied to the thread Do we still need T-Class Fuses?.
      Made a sketch about my understanding of lug terminal connection contact resistance. Looks like 3 lugs stacked has less contact...
      • LUG-BUSBAR.jpg
    • T
      tinyt reacted to Supervstech's post in the thread Do we still need T-Class Fuses? with Like Like.
      If you cannot reroute the cable, at least rotate the lug over so cable isn’t resting on the negative stud.
    • T
      tinyt replied to the thread Do we still need T-Class Fuses?.
      Agreed, but I was trying to fit everything in a space not intended for the EVE F105 cell/battery pack. By the way, not shown, the...
      • SPACE.JPG
    • T
      tinyt replied to the thread Do we still need T-Class Fuses?.
      Picture shown is after the accident. Battery pack is 16S 105AH LiFePo4. ANL is 150A rated. AWG #6 cables used. Ends of red and black 3...
      • ANL Blown in battery pack.jpg
    • T
      tinyt replied to the thread Do we still need T-Class Fuses?.
      Accidentally blew a class T fuse. Replaced it with ANL, accidentally blew it also, nothing spectacular. So, I am now using ANLs.
      • ANL Blown.jpg
    • T
      Started this last night, because i wasn't able to find a working solution for my inverter. so... i made one. I started with someone...
    • T
      tinyt replied to the thread EVE 105 48v 2p16s build.
      IT will be similar to mine: Two 16S S168 (55AH) and one 16S EVE 105. The S168s are two years old and the EVE is one year old. Each pack...
      • 3 Racks.jpg
    • T
      tinyt replied to the thread EVE 105 48v 2p16s build.
      To avoid mechanical stress on the cell terminals.
    • T
      tinyt replied to the thread EVE 105 48v 2p16s build.
      I made 1P16S from the same cells from the same store. I did not use the supplied bus bar and instead made flexible cables with the BMS...
      • FLEX-WIP.jpg
      • Top Pack.jpg
    • T
      tinyt replied to the thread Inverter to battery.
      Make sure it is in series, not between positive and negative.
    • T
      tinyt replied to the thread Modify Shunt Readings.
      Most shunts have monitoring connections accessible. One way is to add a voltage divider network as shown below. Chose R1 and R2 values...
      • Current Monitor.jpg
    • T
      tinyt replied to the thread few questions.
      If I am not mistaken, the Philippines use 220V, 60Hz. I think there is an informational youtube channel by JF Legaspi, might be useful...
    • T
      tinyt reacted to Hedges's post in the thread Conflicting two ways of measure Fuse with Like Like.
      If fuse is too low for inverter, fuse blows. If fuse is too high for wire, insulation melts, then wire shorts. So size the fuse at...
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Back
Top