Recent content by torstein

God point. Little bit more than I do understnad.

Yes they are in 58v as my battery will be at 100% capacy.

I understand. Mabey I can contribute later :)

With mega fuse inside battery pack the risk of the fuse burning of can be a fire issue inside the battery bank?

Anyone know if megafuse for vicron is ok to use inside a battery pack?

Edit. Issent that how pylontech batterys work? You Just set an id on each battery? So if we have 3 esp32 with canbus sender for each battery. If we Just are avle to set an id for each pack they can be paralelled?

I also have 3x jk bms in paralell. Would be cool if we could have 1xesp32 for each bms and set an id here and send them all to another esp32 witch convert all the data to can.

Max voltage is 58v 14s battery

Hello, Anyone who can recoomend fuses and battery switches. Where to buy them and what size? Im building 3 batteries 110a I have 2x 5k inverters Så gues that both inverteres should have a flipable breaker and a busbar between all the batteries and inverter. every battery should have a t class...

Anyone tested this? https://github.com/Uksa007/esphome-jk-bms-can

I think that the bms short courcit is fixed. Can see anything more about this in the log. But I still see this on the inverter side. What could be the reason for this?

Have found the reason for abnormal sensor warning in jk bms: Note Due to this BMS is not properly compatible with Relay and Inverter, occasionally it warns "Current sensor abnormal" or the current is not accurate when the BMS connected to Relay or Inverter, please ignore it if you really care...

Ok. So JK bms is the most preffered bms to yse to build?

Will do. Ordered mine from aliexpress a while ago. Exprect it to be here very soon. ?

Think the ddsu666 will solve my problems.