Most reacted posts
-
Post in thread: JBD BMS relay clicking
My issue was resolved by changing MoS setting in xiaxiang App.. 👍👍👍- Reaction score: 1
-
-
-
Post in thread: JBD BMS with SRNE Inverter.
Issue was resolved by changing MoS setting on the xioxiang App.- Reaction score: 0
-
Post in thread: JBD BMS with SRNE Inverter.
Yes, its exactly like this. Pls guide me step-by-step how to use in open loop setup.- Reaction score: 0
-
Post in thread: JBD BMS with SRNE Inverter.
What is the purpose of this and where is it used?- Reaction score: 0
-
Post in thread: JBD BMS relay clicking
I am also facing the same issue. Can you pks guide how to get rid of this "relay getting continuously on and off sould"- Reaction score: 0
-
Post in thread: JBD BMS (Model JBD-AP21S002) does not allow discharge when battery is fully charged.
- Reaction score: 0
-
Post in thread: JBD BMS with SRNE Inverter.
Yes, the BMS is working but without communication with the inverter. I have selected "user defined" battery and disabled communication.- Reaction score: 0
-
Post in thread: JBD BMS (Model JBD-AP21S002) does not allow discharge when battery is fully charged.
- Reaction score: 0
-
Post in thread: JBD BMS (Model JBD-AP21S002) does not allow discharge when battery is fully charged.
I have installed JBD-AP21S002 BMS with 16s Lifepo4 cells with my off grid solar system. Although its giving good back up but there is one issue that when the battery charging is full and the BMS disables the charging port, no heavy load, say 1.5kw or more can run on the solar system during the...- Reaction score: 0
-
Post in thread: JBD BMS with SRNE Inverter.
I am a novice in lithium battery field. I purchased REPT 280AH LIFEPO4 cells from Alibaba alongwith JBD BMS of 300A. The BMS has detected all the cells and App is also working fine and showing battery statistics correctly. The issue is that the battery cannot communicate with the SRNE inverter...- Reaction score: 0