Most reacted posts

Hoping this will help someone .... Off-grid, One 6000XP, two 48V Lifepower batteries (200AH total). Everything was running great for months, never a W028 EPS Overload Error. I then decided to set my max SOC% to 96% (from 101%) and System Charge Voltage to 57V (from 59.5V) . The following days...

So last evening I put the AIMS Power AC Converter on the busbars, along with the batteries (in parallel) like you indicated. (Busbars more for future additions/expansion). Seems to work, State of Charger light is blinking, I suppose it means the batteries are charging. Didn't dare to keep it...

Hi there, noob question: The more I read, the more confusing some threads got. I'm looking to build an off-grid 2xEG4 LifePower4 48V 100AH batteries (connected to one EG4 6000XP) with around 4000W from the solar array. I like to be able to charge batteries with standard 120V outlet on...

Thanks for the reply! Could you elaborate on what you mean? I was planning to not have the Inverter connected to the grid.

Thank you, yes I would rather the inverter stays off of the grid. When you say to connect this charger to the bus bars, what do you mean. I currently did not have bus bars factored in, so this is very good. Are you indicating the need for 2 bus bars where the charger would be tied in between...