Recent content by wild01

yes but in negative numbers, so I'm wondering if the wires are passing through the sensors in the correct direction. with my clamp meter if I clamp backwards the numbers are negative forwards positive (just by reversing which way the wire goes through the clamp) just wondering if that could be...

@Will Prowse PLEASE review these.

what about the growatt 6000t Everytime I reach out signature responds initially and then ghosts me

I was very excited to see this product, but at that price point I would totally lose interest.

https://shop.pkys.com/Blue-Sea-3131-Surface-Mount-Enclosure-for-two-Circuit-Breakers_p_2727.html this should work

where did you get that rec/filter setup. been considering a similar setup for generator charging

I know this is an old thread, but I was just fighting this same thing on an lv5048, and came up with a unique solution. Thought i would share. I tried adding a resistive load to stabilize the output, but it didn't work, then I was thinking of how an inductive motor load backfeeds power while...

hope you don't use them inside, found that youtube comment: "One of these OLPZ batteries (12v-200Ah) set my basement on fire. Several tens of thousands of euros in damage, huge effort with fire sanitizers, craftsmen's businesses and trouble with insurance companies just because you fell for...

if you want to make sure the charger is dumb enough, just use jumper cables from running car to your battery. pos to pos/ neg to neg.

sla charger should work, but it will need to be a "dumb" charger. smart chargers read the batteries voltage before outputting a charge. since your battery is effectively turned off there will be no voltage out. so if hooking it up to a charger doesn't work check the charger leads voltage with a...

the 300ah 24v looks like it had 2x68ah (8s2p) pouch cells from 2019 that only tested @100 ah total. no compression thin wires cheap bms. also found these german videos of the 200ah 12v which had 2x60ah pouch cells saw a comment on one video that I couldn't relocate that said one caught...

if you're electrically handy check the parallel cell voltages, (small 5 wire connector on bms) there are 4 parallel strings wired in series all 4 should read around the same voltage, they are probably severely out of balance. should meter out something like wire 1-2=3.3v 2-3=3.3v 3-4=3.3v...

not to hijack the thread but freight101.com small business transport. free quotes without an account and in my experience Always the cheapest option. If you live rural with limited local docks, like me everything comes in from the same 2 or 3 lines for the last leg anyways. I have tried to quote...

based on his comments on other threads this may not give me my answer. Distributors have to honor minimum advertised prices on products, basically to be a distributor you can't advertise lower than list price. Just trying to figure out if eg4 is allowing ss to use lower advertised prices than...

so I guess the next question would be can you sell the eg4 items for the same prices signature solar gets to advertise them for? or does signature get to undercut all other distributors?