• Have you tried out dark mode?! Scroll to the bottom of any page to find a sun or moon icon to turn dark mode on or off!

diy solar

diy solar
Z

{Z}

New Member From Minnesota
Joined
Last seen
Messages
13
Reaction score
2
Points
3

Latest activity Postings About Most reacted threads Most reacted posts

    • Z
      {Z} replied to the thread Is this doable? 6 server batteries split to 3 & 3.
      One reason a guy would want to do it is if your two 6000xp's couldn't communicate in parallel. I know a guy - definitely not me - that...
    • Z
      {Z} replied to the thread 6000XP Already Broken - Help?.
      Did update this morning hoping for something -no dice. I swapped my subpanel back to Inverter 1 and checked how the grid bypass was...
    • Z
      {Z} replied to the thread 6000XP Already Broken - Help?.
      Thanks for youe help EPicTony They do function independently. I did a quick subpanel wiring job and verified that that each inverter...
    • Z
      {Z} replied to the thread 6000XP Already Broken - Help?.
      Thanks everyone for chiming in and helping me figure out what is wrong! I am indeed using the supplied cables and nothing homemade. I...
    • Z
      {Z} replied to the thread 6000XP Already Broken - Help?.
      On this inverter the eps switch is on but the AC supply breaker on the unit is off and there are physically no wires landed on the grid...
      • 1732367906897.png
    • Z
      {Z} replied to the thread 6000XP Already Broken - Help?.
      Indeed! I am rather certain that I connected my red and black wires to the correct terminals on my breaker. However, The inverters...
    • Z
      {Z} replied to the thread 6000XP Already Broken - Help?.
      I'm honestly a little baffled by these cables. I'm using the ones supplied by SS/EG4 and after trying to discern directionality with...
    • Z
      {Z} replied to the thread 6000XP Already Broken - Help?.
      I can't verify the polarity of the grid inputs at the time of the pop, but I am a "red on right" kinda guy and I was not rushing to put...
    • Z
      {Z} replied to the thread 6000XP Already Broken - Help?.
      I updated both to ccaa-190D0E. I updated this morning from the comfort of my chair in the fireplace room and then also remotely...
    • Z
      {Z} replied to the thread 6000xp EPS cycling.
      I think I'm having a similar issue with mine. Mine was running for about 10 seconds, cut EPS for a second, then supply power again for...
    • Z
      {Z} replied to the thread 6000XP Already Broken - Help?.
      They do both function individually.
    • Z
      {Z} replied to the thread 6000XP Already Broken - Help?.
      Forgot to add that! I was just going to say they both are at ccaa-000D0E, but I see one of them is on ccaa-180D0E. I guess when I...
    • Z
      {Z} posted the thread 6000XP Already Broken - Help? in Off-grid Inverters.
      Appreciate all the knowledge on the forum. Hoping some can be specially tuned to my circumstances. I just traded in my EG4 6500Ex's for...
    Show older items
  • Loading…
  • Loading…
  • Loading…
  • Loading…

diy solar

diy solar
Back
Top