diy solar

diy solar

Daly Smart BMS SOC not show

Norman-Golf

New Member
Joined
Nov 15, 2021
Messages
2
Hi Guys,
I just got a Daly Smart BMS for 12 V 100 A system.
After connect everything and install Smart BMS, everything gone well except one thing the SOC dispaly always show 0% even I set Rate Capacity already. It still show me 0%.
Anyone know about this?
 

Attachments

  • Screenshot_20211115-191041_SMART BMS.jpg
    Screenshot_20211115-191041_SMART BMS.jpg
    65.2 KB · Views: 8
  • Screenshot_20211115-194953_SMART BMS.jpg
    Screenshot_20211115-194953_SMART BMS.jpg
    73.1 KB · Views: 8
You need to set the capacity and charge to full. The voltage isn't a proper indication of the SOC due to the flat curve, so it will use the cumulative discharge current to calculate the SOC.
 
Back
Top