Hello everyone!
First off all I want to thank you for such a rich forum,plenty of information that helped me to build DIY system.
As many might not know in Lebanon,where I live, we are going through hyperinflation and because of that we only get two hours of electricity per day,if we are lucky!
Few months ago , Installed Growatt 5000esp with twelve Jinko 540W panels that i run without batteries through summer while waiting for my lifepo4 to arrive from Alibaba seller.
They finally arrived , 302Ah 3.2v CATL x32, and I'm happy to share my installation that has been running almost flawlessly for past two months (had small issue with connection that melted through that causes non damaging short-circuit)
My setup is:
302Ah CATL 3.2v x 32
Growatt 5000esp
Daly BMS 100A x 2
Two 200A circuit breaker
Settings :
Charging current 90A
Charging voltage 56.4v
Floating voltage 54.4v
Cutoff voltage 47.9v
All this gives me around 27kw of stored energy, enough to be totally off-grid.
Approximately I paid 10k USD to build it.
Thank you again, feel free to ask me anything.
First off all I want to thank you for such a rich forum,plenty of information that helped me to build DIY system.
As many might not know in Lebanon,where I live, we are going through hyperinflation and because of that we only get two hours of electricity per day,if we are lucky!
Few months ago , Installed Growatt 5000esp with twelve Jinko 540W panels that i run without batteries through summer while waiting for my lifepo4 to arrive from Alibaba seller.
They finally arrived , 302Ah 3.2v CATL x32, and I'm happy to share my installation that has been running almost flawlessly for past two months (had small issue with connection that melted through that causes non damaging short-circuit)
My setup is:
302Ah CATL 3.2v x 32
Growatt 5000esp
Daly BMS 100A x 2
Two 200A circuit breaker
Settings :
Charging current 90A
Charging voltage 56.4v
Floating voltage 54.4v
Cutoff voltage 47.9v
All this gives me around 27kw of stored energy, enough to be totally off-grid.
Approximately I paid 10k USD to build it.
Thank you again, feel free to ask me anything.
Attachments
Last edited: