Huck
Watts are Universal
Hmm I must've got a very strange version then? 3 pins on the CAN/RS485 port. measures exactly 3mm apart (so 1mm pitch), and it's a JST GH style socket which is typically only available in 1.25mm pitch.
View attachment 97477
I agree with @Steve_S here - would you guys be able to provide some "pigtails" for these special plugs? For instance, my version has the K+/- line to activate BMS, yet I dont have a display screen (was never sent one, nor told the option I should buy one). If I had a pigtail I can at least create a momentary switch to enable BMS. Without it, I had to find a very small metal tweezer to short pins K+/- without touching any other pins. It's obviously not ideal to work with. So if pigtails are available, I'd like to order some!
----
EDIT: lol like literally 1 second after i posted reply I realised my idiocy!.. 3 pins is 2 pitches apart... so 1.25mm does sound about right cos that could be exactly 2.5mm distance between the 3 pins (call it parallax error since im hovering the verniers above the connector). Confirmed on the 6 pin plug too since that's 6.25mm between the 6 pins (so 5x1.25) ... In that case I'll try some JST 1.25mm connectors and see if that works.
You could open the thing up desolder the header and just solder a normal JST pigtail to the board. NO? You may also find label for pinout too..
I thought I saw somewhere that the GPS 4 pin plug is RS485 #1 though, even on that newer model?