Search results

That diagram they are using an auto transformer I cant quite make sense of how to use this diagram for my setup.

The online manual has 3 phase and parallel but nothing with split phase.

About to get my second inverter to setup my split phase with my 48/3000 Victron multiplus II but cant seem to find a wiring diagram that applies, anyone have one or some guidance? Thanks.

100A

I have 116v ac on the battery terminals. What does this mean?

Daly sold

Pmd

Yes

Following

Jbd with terminals

I will try this, thank you.

I am positive, once the code pops up it reads 0 amps in or out and at 70-80a there is no movement in SoC.

It has to be my heat pump based on messing with it I cant get it to do it with it off so far, granted its 11am here so its pushing 70A at the moment. Is there anyway to test for this "feedback"?

When I get my second battery connected it will be interesting to see if the both act the same or if its just the one being faulty. Thanks for the link ill give that a try and maybe I can bug them about PC to JK BMS connection while I'm at it lol.

Thanks for the reply, I am using a Victron Multiplus 2 48v.

I noticed this morning my JK BMS is throwing a "Protection current sensor anomaly". Unsure what this meant or how to remedy I contacted the seller on Aliexpress and I am being told this is a known issue and through some translation my understanding is that the BMS is picking up feedback from the...

My second JK BMS is here today along with the 485 connectors but I am unable to find any software to use for it and the seller isn't sure either. I need to be able to remotely view and control my BMS's. Is anyone using software to log/modify their JK BMS on the pc and if so what software are you...

100 shipped for Daly 8s obo Sold 55 shipped for new jbd 8s 75 shipped for jbd with cables and soldered terminals obo

Thanks for the reply, what would this look like? just using one leg of the split phase?

This is my current setup. Victron 250/100 MPPT Victron 48/3000 Inverter 4.8KW Solar 27KWh 48V Eve Cells I don't use much grid power currently, occasionally to top off batteries in the winter. The system is separate from the main grid and is ran off it own circuit panel. However I want to be...

Phase synchronization is how brands like Victron work I’m assuming? This prowatt xfer switch probably has the same tech in it as the moes?

Anyone else use these before? Quite a bit of concerning reviews about frying inverters and other problems. Need to find something I don't have to worry about.

Sold

Pic

Thank you! Do you recommend having balancing only while charging? Unsure if they are more likely to come unbalanced in series like this.

I’m currently waiting on my JK bms to show up but I wired my 2 24v banks in series which have been in parallel for some time now. I’m having a problem with one bank hitting 28.4 and single cell over voltage and the other bank is still at 27. Do I need to top balance these all together? They were...

The usb doesn't allow access to the device without dc power, how do I switch it to 48v without being on 24v or on 48v with it still on 24v?

Columbus, NE

I have a 24/3000/70 multiplus for sale, just upgraded to a 48v inverter no longer have a need for. I bought it brand new from altestore right at the beginning of year, can show receipt date if needed. Located in US will ship 800 plus shipping. Thanks for looking.

My first Victron product was the 250/100, would not recognize pv input at all had to return it as it was DOA. I was hoping this was a fluke as I have heard so much positive things about Victron up until just recently. Also doesn't seem like many people on here run them.

I've never tried changing the settings while just plugged into the usb is that possible? Or are you saying to change it from 24v to 48v right before plugging in the 48v battery?

I understand this is a relatively new inverter from victron but there's little to no reviews and talk about these 48v 120v versions out there.

How was the warranty process? Did you go through Victron themselves? I hope this is not my fate when I switch my mppt to 48v.

Thank you for the response, my 2 reasons I have went with Victron this long are reliability, quality and ease of use (software setup). I will for sure look into those brands though as I don't want to limit my options completely and already invested much more than I intended in this. Have you...

So I think its time to go from my 24v system to a 48v system, unfortunately this means my multiplus 3000 will be useless and its hardly been used. I had a post a while back with over paneling and heat issues and so forth but I think its just best if I go the 48v route (something I should have...