Search results

  1. S

    Headaches with Daly BMS.

    Hi all, I’ll try to make this short. Received 4 200a cells on the island of St Martin 1 1/2 years ago. Could not get a BMS to use so I rode bare back until just recently. The cells were all equal all the way up to 13.4v, never charged higher than that as I was being careful without BMS. Never...
  2. S

    Daly BMS fail

    At least I think so. I am a newbie at this so bear with me. I installed a Daly 4s 3.2v 100A BMS on my 200A aluminum case cells. Just as I did this my 70A alternator failed due to worn out brushes. This caused a lot of consternation because of the timing 😒🤔. I replaced with a large case 120A...
  3. S

    Lifepo4 charging by alternator.

    I live full time on a boat. For a solar system this means shading problems because of all the rigging. I wire my panels in parallel because of this. On cloudy days or days when we put a heavy load on, like running computers or run the watermaker we need to fire up the engine and charge the...
Top