diy solar

diy solar

Search results

  1. WallK

    SOK 48V 100Ah PRO reports too high battery max. discharging current

    This number is what inverter interprets BMS data, it's reported by inverter. I did not sniff 485 to check real packets sent by BMS My assumption is: if charging current is reported by inverter in straight 1A value format -- the discharge is the same But I could be wrong and your 16bit difference...
  2. WallK

    SOK 48V 100Ah PRO reports too high battery max. discharging current

    I have SOK 48V 100Ah battery connected to MPPSolar inverter by RS485 (with Pylontech selected as protocol) It's set up to bypass (to grid) if the battery can't provide enough power, but in my tests BMS turns off by OCP and then the inverter faults with too low bus voltage. Bypass never happens...
Back
Top