Search results

  1. R

    Sun elec miami fl

    Hi guys im gonna buy some used solar panels at sunelectronics international in miami florida 15901 nw 59th ave in miami lakes 33014 so i wanted to know if you guys know the place , have bought panels there , good quality used panels etc etc Ive been recommended to them via this page , but i...
  2. R

    Sunelectronics international miami florida

    Hi guys im gonna buy some used solar panels at sunelectronics international in miami florida 15901 nw 59th ave in miami lakes 33014 so i wanted to know if you guys know the place , have bought panels there , good quality used panels etc etc Ive been recommended to them via this page , but i...
  3. R

    Something wrong ?

    Got it !
  4. R

    Something wrong ?

    Btw The panels are used and each measure open circuit around 31-32v So 10x 32 v = 320v open circuit on the roof But how come i get 220ish with the panels connected at the breaker that goes to the inverter? if i disconnect the panels at the breaker from the inverter i get the 320v but as i...
  5. R

    Something wrong ?

  6. R

    Something wrong ?

    Wow man Im gonna read that 5 times !!! Thnx a lot
  7. R

    Something wrong ?

    When i measure on the roof , its disconnected you can say open circuit of the 10 panels in series
  8. R

    Something wrong ?

    When i measure on the roof , its disconnected you can say open circuit of the 10 panels in series As soon i connect the panels and measure again at the breaker i get the lower voltage
  9. R

    Something wrong ?

    Pip 5048gk mppsolar inverter 2 x 10 panels in series than paralel to the inverter panels are 250w 8.5 amps Open circuit they all measure around 33v if i measure 1 string (10 panels in series) on the roof i get around 320v, which is good The i go measure at the breaker before going to the...
  10. R

    Pip 5048 mpp solar

    Lead acid telecom batteries 12v 190ah
  11. R

    Pip 5048 mpp solar

    Hi guys what are the best battery settings for my 48v solar system Meaning bulk , absorption and float voltages thnx
  12. R

    Victron compatibility

    Is the victron 150/100 charge controller compatible with other brands charge controllers? i want my victron 150/100 and a Mppt solar charge controller charge the same battery bank but each ch controller has its own solar panel aray possible ?? pics for reference
  13. R

    2 victron charge controllers

    Yes , i still need the bmv712 I did allready set up the 2 charge controllers to “talk” to each other
  14. R

    2 victron charge controllers

    Some old pics here attached 14 x240 watt panels 24v -220v 6000w inverter 24v -110 v 3000w inverter Victron 100/50 and 150/100 charge controllers im planning to add 1 more bank ( 2 x 190ah) 24v and then split the banks Victron 150/100 to 10 banks and here the 220v 6000w inverter Victron...
  15. R

    2 victron charge controllers

    I have 24x 190ah batteries 12 pairs to make 24volts Totaling 2280ah and about 1140ah usable
  16. R

    2 victron charge controllers

    Question/ opinion can i use 2 victron charge controllers to charge the same battery banks One is 150/100 and the other is 100/50 Thnx
  17. R

    [USA-AL] [H] 250w 60cell santan panels [W] Cash, other power stuff.

    Ok shipping to miami florida 33166, can you also arrange that if i buy ? Any Discount ??
  18. R

    [USA-AL] [H] 250w 60cell santan panels [W] Cash, other power stuff.

    Do you still have the panels?? Im interessted in about 20 panels Let me know
  19. R

    Victron bvm712

    Will do so , as soon my bmv 712 smart arrives Thnx
  20. R

    Victron bvm712

    Btw with my multimeter on the green and white/green wires , i flip the switch and they make contact So those 2 wires turn the inverter on and of on the remote
  21. R

    Victron bvm712

    Here ya go you can see the green and white/ green wires go to the on/ of switch so what happens now???
  22. R

    Victron bvm712

    You know what , im gonna desolder the 2 contacts so i can flip over the circuit board and take a picture will do tomorow , and thnx for helping me out with this
  23. R

    Victron bvm712

    Btw Some pics of my 24v system
  24. R

    Victron bvm712

    Pic attached
  25. R

    Victron bvm712

    Tictag Only way to flip over circuit board is to desolder the 2 marked connections , which i am afraid to do to not damage the board and yes the remote switch has a indicator light
  26. R

    Victron bvm712

    Thank you tictag Here a pic of the circuitboard of the remote on/ of inverter switch Any help with which wire goes to where,???
  27. R

    Victron bvm712

    Sorry for the bad pic , Its a toggle switch , pic attached below and also where the cable from the remote on/off switch connects to the inverter hope all this helps
  28. R

    Victron bvm712

    This one , and luckely it has e remote on/ off switch
  29. R

    Victron bvm712

    No one???
  30. R

    Victron bvm712

    Hi guys how do i wire / setup my victron bvm 712 smart battery monitor to turn off my inverter at a certain preset low voltage ??? Any one of you did it ??? My inverter has the remote on/ off switch also
  31. R

    Automatic transfer switch

    My setup below setup is 24v 10x 240 watt solar panels 24x 190 ah batteries (12 pairs in series) Inverter 24v to 220v continious 6000 w / peak 12000 watt Inverter 24v to 110v continious 3000w / peak 6000watt Victron 150/100 charge controller Aili batt monitor with 500 amp shunt yesterday i...
  32. R

    Automatic transfer switch

    No , using only 220 v in this case and i am pulling around 125 amps from my batteries thru the inverter to power my ac units
  33. R

    Automatic transfer switch

    I was thinking about that moes ats but its only capable up to 50 amps
Top