Search results

This one ? This i I believe, status of solar panel - My is displaying now : Cut out - because it is dark now.

Only via USB.

You don't need anything new. You already have Venus OS installed and in your local network. You easily connect to remote console via your Internet browser on your PC or mobile. https://www.victronenergy.com/media/pg/Venus_GX/en/accessing-the-gx-device.html#UUID-7172192b-9df8-2fcd-7b74-ab50eb3bb35c

They have a great support. I'm glad it helped. Now the only thing left to improve Epever Cloud is - realtime data !

hmmm... Contact Epever support. They helped me. support@epsolarpv.com

That's exactly what I got when I created a new user and wanted to register an old device. That is wrong. Just use the old email from the original registration. Just run old application and go to My account and you will see your e-mail account for that old registration. Then go to Solar...

Old login is working but you need to use e-mail address for username. Password is old. On new server username MUST be e-mail. On old server you could use username or e-mail.

After two months, I look at Epever cloud and see that it is still not working. I contacted Epever support. There is a new Epever Cloud server at the address: https://hncloud.epsolarpv.com/#/login The mobile application is also new. Solar Guardian. It is necessary to log in Solar Guardian with...

Working flawlessly - 250 A, 200A, 60A and 80 A BMS in parallel for more that 2 years. All LiFePo4 of cors.

The Epever Cloud web site was offline over the last few weeks. Browser returned a '404 Not Found'. Epever cloud web is working at the moment - BUT WIFI Adapters are offline and they won't re-connect to the cloud. Let's hope that they are working on some major system upgrade.

I disagree... watch video : There are 2 identical MT-50 - but apparently different hardware revisions. Why don't just call him MT-51 or MT-50 b...

I had problems with my Internet connection on Sunday. At the same time my mobile phone offered me an upgrade version to 2.7.2 After the Internet went live on Monday, EPEVER was still offline. I also tried to delete it and then manually add it again, reset it to factory settings, but nothing...

Yes my SmartShunt was in plain white box too. It is normal. Bought from official Victron distributor.

Give us more details. When and what exactly do you have on your screen. 1. Make sure that you have strong signal of WIFI Access Point - otherwise you will have huge problems with setup 2. Make sure that you reset the device to factory default 3. Follow the steps from page 1 on this topic

I didn’t connect to the app for a few days and noticed it looked a little different. And yes, the new version is 2.5. A few new options under Param settings... Battery settings now has more settings to change. Added Equipment information and power statistics. For now I don't have any issues.

After a week of correspondence with Daly support, this is the official response: The engineer told us that the BMS you purchased was a long time ago, and there is no cycle count. We will only open this function in August 2021, please use it with confidence, thank you! To my question what is...

Mine has also been at 0 for a year now. I think it is bug in sw. But I found this on Internet - Each time you remove and replace a total of 80% of the batteries stored energy, 1 cycle is added to the count. Maybe this is an answer ?

I agree. Especially for a weak signal. And here is my experience for the last few days. - Realtime monitoring on mobile version - not working - when I enter the application it reads the status and that's it. After that there is no refresh. I have to manually pull down every bit to refresh. My...

Me too. And they send me a new youtube link : This time Sean explains everything...

Of kors. First and foremost - don't even try to set it up if you don't have a wireless access point VERY CLOSE to the WIFI module. My estimate is that the range of the WIFI module is - maybe a few meters! The module has a very poor WIFI range. 99 percent of problems are because of that. I'll let...

Yeeesss... this video helped! BUT ONE VERY IMPORTANT DIFFERENCE! When I configured everything I didn't reset the WIFI module like at 8:20 in the video !!! All I needed to reset the WIFI module and everything is working ! Such a little detail and nothing is working... :cool:

Well, it doesn't work for me... Can you please write here all steps on how did you configure the module on your phone? I'm missing something.

That was the first thing I noticed. The signal strength was minimal to my home WIFI router. After opening the module I realized that the module has neither an internal nor an external antenna!! Look at the pictures. So I added another Access Point to my garage. AP in the garage is connected via...

Yes, I have this set correctly. But my version is a little different from the version on youtube :

Yes, I have a WIFI module. EPEVER-WiFi-2.4G-RJ45-A WiFi module adaptation with Could Function. Maybe there is another problem and that's why we have different settings... Inside the app offers me an update to version 2.1.6 (I have version 2.0.0. from Google store), but when it downloads asks me...

Where exactly are these settings? I only have edit plant settings and slave is 1. Edit RTU doesn't have that.

Does anyone know or have experience with setting up an Epever Cloud WIFI adapter? https://www.aliexpress.com/item/1005003649502832.html?spm=a2g0o.order_list.0.0.21ef1802rwqSLf I have Tracer 3210AN and is working fine. The hardware revision is 411 and software revision is 156. I adjusted...

I believe there is an official solution for this : https://www.aliexpress.com/item/4001150311339.html

Hi, Did you see this video? I can't find anything official on webpage : https://www.epsolarpv.com/downsoft.html The biggest news is full support for LiFePo4 and Li-Ion without user customizing. Is this a legit official upgrade?

There is another solution :

Hi, I have an old iPad 2 and I want to install Victron Connect. It has IOS 9.3.5. which is the latest for that model. IPad is in great shape and I want to use him for monitoring Victron devices. Is it possible to install on such an old device?

I confirm too. After changing to 15300, BT connects every time. Even after several days...

That's great news. I can't wait for the version for Daly BMS to be released as well. I volunteer for testing! I have a Raspberry Pi 4b loaded with VenusOS. For that connection, we will use standard Ve.Direct USB cable to UART connector on Daly?

I bought a SmartDaly 60/30 A BMS and could not get it to work. On output, I measured 3,06 V, not 13,67 V which was correct. The Manual is very confusing. It says: Make battery board is activated by clicking an activation button on the BMS. I don't have an activation button on my BMS. I knew my...

Your Solar Charge controller has a built-in timer so you can program it to switch on and off whatever you like. Mine Victron is programmed to switch on at sunset and switch off at sunrise. And it is working perfectly.