Search results

Is anyone selling compression plates for these cells?

What is the recommended screw size for mounting this BMS?

Are these a worthwhile upgrade over the EVE LF280K?

Thanks Nami

I just received a new JK BMS and the model number ends in R. JK-B2A24S20PR Does anyone know what the R means?

I'm trying to find a communication cable for a PowMr inverter - Model# POW-HVM10.2M The inverter uses an ethernet jack for RS232 communication. I found this cable on the Solar Assistant website. https://solar-assistant.io/shop/products/voltronic_rs232 It's going to cost approx $70 to have...

Would you be able to provide a source for these cables/connectors? I ordered (what I thought was the correct plug), but it does not fit. Here is a link to what I purchased. https://www.ebay.com/itm/256019324270

I'd like to try the USB to TTL method with my JK-B2A24S20P. Should I be using the GPS port, as suggested above by @sw25481 If so, what connector is compatible with this port?

Thank you! I appreciate the fast response!

I have 32x 280Ah EVE cells arranged in the following configuration. (2P16S) I'm using a JK BMS (Model# B2A24S20P) Should I have the battery capacity set as 280Ah or 560Ah?

Yes, it works. The generator connects to Gen Input on both inverters. Grid connects to Grid Input on both inverters.

How does this one look? https://www.ebay.com/itm/191438007748 USB to RS232/TTL PL2303HX Cable Adapter Module Converter Adapter For Arduino

Can anyone provide a link the the ttl/usb converter that works?

Also, can anyone tell me what wire gauge is used on the JK BMS balance wires. I want to make sure I order the correct ring terminals.

B2A20S20P or B2A24S20P - Is one of these a newer model compared to the other?

Can anyone recommend a specific JK BMS model for my use case? I have 96 cells arranged into 3 banks (32 cells each). See image above. I will need 3 BMS's, one for each battery bank. I'm looking at the HankzorBMS Store, and I'm a little confused by the different options. Are these all pretty...

@misterbubbacat - Are you successfully pulling power from the grid?

You can get single-phase units shipped to the US, not split-phase. That's why he's using the Victron autotransformer.

It looks like this is the single-phase European model. Not split-phase.

Nice write up! I'm looking forward to seeing more.

This is the response I received from LuxPowerTek in regards to firmware release notes: "Adam informed us of the assistance for the firmware udpate . And the optimization for the firmware udpate : 1. AC coupled solution is added 2. control logic with the generator"

Thanks. I don't know why they're asking for the serial. I'm surprised I even got a response. I'll keep you posted as to their response.

I'm trying to obtain the release notes from LuxPower, and they're asking for the serial number. Can anyone provide a serial number I can send to them? My inverter is still en route from China. Thanks!

Is this the most recent firmware version? FAAA-0E0C

Hi Everyone, I just received 96 EVE cells (280Ah) that I will be building into 3 banks of 2P16S. I need help choosing a BMS. I'm running 2x Deye 8k inverters in parallel. Communication between the Deye and BMS would be a plus, but not a requirement. Can anyone make any recommendations that...

Is the firmware the same across different vendors? I have one on order from another vendor. It's labeled as LuxPowerTek, not GSL.

Is GSL still the recommended vendor to purchase from?

I'm looking forward to your review on these. I was about to purchase 7 of them, but now I'm hesitant.

Have you tried the SolarMan app? https://home.solarmanpv.com/login https://pro.solarmanpv.com/login I'm currently using Solar Assistant which runs locally on a Raspberry Pi, but can be accessed from any internet connection. https://solar-assistant.io/

Is anybody currently using this inverter and can provide any feedback? I'm currently running a Deye 8k and would like to upgrade.

That was my first thought as well. I currently have the BMS disconnected and there is no change in behavior.

I can't seem to push more than 75 Amps when charging batteries via solar. I have the following settings applied: Max discharge current: 125.0 A Max charge current: 125.0 A I'm currently generating ~11kw. 4k is going to the batteries, 4k is going to the load, and 2.4k is going back to the...

When the inverter is connected in parallel, the diesel generator should also be connected in parallel.

Hello, I currently have two Deye 8k inverters connected in parallel. I have a 6000-Watt generator that I'd like to connect to the system, but I cannot find any information regarding the parallel inverters. Should I connect the generator to the master inverter only? Or does the generator need...

Have you looked into the Orion? https://www.orionbms.com/products/orion-jr2-bms/