Search results

10 hours seems reasonable.

Geo: Waterfurnace Series 7 (installed in 2014) Solar: Mission Solar MSE305SQ5K Solar Panel (305w)(16x) Enphase M250 60 (x4)installed in 2015 Enphase M215 60 IG (x12) installed in 2019 We switched from gas heat to Geo.....I do not notice a difference except our thermostat only fluctuates a few...

Yeah that has helped. After investing in a whole house energy monitor I started to understand how my house was using electricity. My old Panasonic Plasma was using 6-9kwh per day. That kind of wastefulness is not tolerated anymore.

What I paid in 2014 vs. now (last column). I spent about $30,000 on the Geothermal and Solar. 3400 square feet walk out basement family of 5 SETN running AC 8 months per year No gas heat after adding Geothermal Water Heater only used 36 kWh for September because of the Geo. 40,000 kwh per year...

Yes. Lol.

Only if you do it yourself and you can get 30% back from Uncle Samantha. There are plenty of things in life people waste their money on. How many vacations or recreational purchases eliminate or lower a monthly bill for 20 years? Of course folks who have frequent power outages have other...

I wish I could go back and insulate my house before the drywall. I never considered where heat creeps in at the top of the drywall.

I asked the same question at first. Then I went back a reread his post. He is going to put up 3 arrays (1 grid tie, 2 for backup on shed and yard I assume) The 4.5kw grid tie will pay for most of his electricity and charge his car....the shed (2 arrays-48v 5kw) will be back up.

Ouch. That is per month? How much are you charged per kwh?

You must not need AC in the summer.

What is the average wattage and peak wattage for a residential home with 200a service box? I have seen mine as high as 15,000 watts but the average is around 2,000w In my area the monthly usage is around 1400kwh per month 47kwh per day or 1958w per hour.

"Wheres the piggy? Oh theyeeaw."

Agreed. I dont use the Facebag or the Twit. Just YouTube and Forums.

I did consider the uni-t-ut210e https://www.eevblog.com/forum/testgear/a-look-at-the-uni-t-ut210e/

I went with the BM065 - Compact

I am just going to run 2 independent arrays. 4.88kw grid tie (Microinverters) 2.4 - 4.88kw off grid

BM162 - Large BM065 - Compact

I am partial to Brymen. http://www.brymen.com

Any recommendations?

I am the only home in the neighborhood without a smart meter....also the only one with solar panels. My local power company pays me 2 cents more to produce electricity. 20 year contract. rate 9.38kwh + fuel adjustment costs if this goes up.....so does my premium rate. +.2

What do folks use? I use Meguiar's® G7148 Gold Class™ Car Wash, long handle soft bristle brush, 18" squeegee.

My peak power is higher today 3.51kw, 3.61kw @ 1:35PM EST M215s have peaked. 225w M250s have not. 230w

I have great credit. I daisy chain loans and lines of credit ...pay them off...then I close them down. My first cc was a one year 0 interest card that I used for solar only.

I just paid my panels off last week. No Credit Cards No Mortgage On my way to Net Zero...I will get there eventually.

I cleaned my panels tonight. We will see if that makes a difference. Sunny and 89° tomorrow. Previously I went 4 years before i cleaned my panels. It was obvious in June of this year that the production was affected.

I don't think Starbucks serves Schmenti anymore. I hear they had problems with the Venti mixture.

Yep. Produced 24kwh today. My local power company will pay me for 29kwh

Wouldn't a lean-to roof be better for solar?

I am in SETN. Yes those trees are north. Note: I have had a 1.2kw system for 4 years so I am looking at 550kwh for September based on previous years. I have produced 491kwh so far this month.

Spray foam it and turn it into a Yeti.

I just bought a case of 12 new for $460 shipped. M215-60-2LL-S22-IG If you consider the 30% tax credit they were $27 each ....or without $38

These panels have only been deployed since July 23rd. I did wash 2 of them to see if it made a difference. It did not. I installed as many as the Grid Tie trunk would allow in the space that I had available. Maybe I should have installed fewer panels and titled them.

I installed a 4.88kwh grid tie Enphase system on July 23rd. Peak power was 3.7kw (until late July) which is peak power for my microinverters 4x M250s(250w), 12x M215s(225w) However I have not seen the system near peak again since August 3.6kw. 3.3kw is highest peak power I have seen in...

Point it at your rim joists and the top of your walls where it meets the ceiling. This is my next project...insulate my rim joists....curious how it will affect my energy consumption this winter.

Dryer....200-5500 watts for 50 minutes. I use a clothes line but my wife does not. I am considering the following: Portable Compact Lightweight Mini Twin Tub Laundry Washing Machine