Search results

Hi, Could you tell me if my cells voltage diff is normal ? It seems a bit high ... I've got a LifePo4 280A 12V cells. Thanks.

Hi everybody, I have two 215W solar panels in paralel (total of 430W). In France it is 1:45 pm, it's really sunny not cloudy and I can read on the MT50 that I only have 141,5W .... Also according to the main screen of the MT50, the battery is fully charged but I only have 13,8V and my BMS app...

Hi everyone, I have a 4S 280A evecells with a 120 A overkillsolar BMS. I am using 2 inverters : - an edecoa 1000W (2000Wc) dedicated to my fridge - a victron 400W (900Wc) that I use for charging computer, batteries and other equipments ... These past days I had a lot of power cut off while...

Hi everybody, I'd like to install a battery master in my RV in order to charge my engine battery with secundary lifepo4 battery. In France, people usually use the CBE CSB2. When the leisure battery voltage is lower than 12.5V, the car battery recharging system is deactivated. However, I have...

Hi guys, On my self-converted RV (renault master 3), I have some issues with the engine battery. While I am parked, there is a too high consumption of the electronic equipments. Therefore, after few days opening the doors without driving, my engine battery is empty ... (I have already spend...

Hi guys, I designed my solar system with someone's help. All my equipment (Epever MPPT, Battery protect, inverter and charger) are connected together on busbars. I am not using the Epever load outputs. I installed a switch on my LifePO4 BMS and I noticed that while the BMS switch was off...

Hi all, I made my own LifePO4 battery from aliexpress raw cells. It is a 280ah. For it, I bought the overkillsolar BMS and the epever tracer4215BN for my 2 solar panels 215 W in parallel (total 430 W). I'd like to check with you what would be the good settings to begin with, as I have few...

Hi all, I bought a Victron's battery protect to go with my 12 V 0- 280 Ah LifePO4 but I have no idea which program I should use. Does anybody can help me with that ? Thanks :)

Hello everyone, I need a longer cable for the remote meter mt50 of my mppt epever. On the manual they say to get a CC-RS485-RS485-200U-MT. But I can't find any with this model number on internet, at least in Europe. Do you have any idea which cable could work for this use ? Thank you for your...

Hello, I wanted to connect a switch on my overkill solar BMS but it seems that the connector is too big for the port. There is this small plastic thing that seem to block the entrance. Did I miss something ? Thanks for your help !

Hello all ! I am currently thinking of my new solar system, but I have so many questions ... (and sorry If my english is not perfect :( I hope you would understand me right). I have decided to install in parallel 2 solar panels of 215W each (they have 72 cells). I calculate the Voc and Isc...