Search results

Looks good . I’ll set it up that way. Thanks

Thank you snoobler. I did not think about that . According to the AC200 manual the input limit is “ 12A (only 12A will be received when the current exceeds 12A) So with the 2S3P setup it will give me 47.4V and 18.18A . Not that efficient since I’ll loose the amps above 12A Thanks for guiding...

Thanks fir your help snoozer. Greatly appreciated. I was thinking since I don’t live in a cold climate and the less panels you have in series works better on cloudy days that I would use this configuration 2S3P. On cloudy days if shade only effects one of the series panels it will only effect...

Thank you for your response snoobler. So this is the way I should wire them. This is then 3S2P. so this would give me a 23.7V open circuit voltage (VOC) per panel with a Current at max power (Imp) of 6.06A which gives me a total of 71.1 Volts with 12.12 amps I will need Solar Y Branch...

I'm in South Florida so cold weather should not be an issue. So of I understand you correctly you are saying to set the panels up in 3S which means 3 sets of panels made up of 2 panels in each set wired in series then 2 parallel connections connecting them to the AC200. If it is possible can...

I'm a Newbie and just trying to set this up correctly. I have a Bluetti AC200 Solar Generator with 6 Bluetti Sp120 Solar panels. From What I have read I must stay below the Max 145V and the Voc for each panel is 23.7v X 6 =142.2V in Series. The Max Solar input of the AC200 Solar Generator is...