Search results

I have a cyber power pure sine ups it still only works for a short time. This really makes it indefinite with the 30kw batteries on that light load panel. Lol. When in doubt use a bigger hammer. ?

I am not sure about parallel. I do not believe so but it is hybrid so maybe it senses the power and parallels automatically. I have wondered a couple of time just not read into it.

Sorry for the bad hand writing. Those are the 2 scenarios. Right now I am ok with the UPS one. Oh and the bond ground. There are 2 wires coming off the neutral. The ground seems to be the case only. Once I hooked up the full panel it seemed to be ok. Voltages are all correct both on battery or...

I will try to sketch something but had an update. I did a partial load test. I switched the house off grid and on batteries ?. It did ok. It did brown out a little when both 2.5 ton ac’s kicked on at the same time. But held. I also did the coffee pot, microwave, some lights, tv etc. It showed...

So that may not make a lot of sense what I am doing. It is 2 fold. We have a lot of power outages and even more power flickers. We also have the occasional hurricane and lose power for a few days. My wife always complains she loses work when we have the flickers. So I want an ups all the time...

So quick update. I have 2 x 200 amp panels one has most of the big stuff. The other is mostly lights and receptacles it is fed through the first. The main is even before those. I back-fed to the second panel with a 6/3 wire and 60 amp breaker from the inverter. I also have a 30 amp generator...

I went through allí express. I asked Alibaba but he never responded back to me. Oh well.

Wow you are good. I was supposed to use a post connector. I do not have any that big. Ended up soldering them. There is more but I will leave it at that. Lol they should be fine. I got a message from them. They want to know settings. Will get them to them.

Here are the faults.

So I sent them a few pictures and videos. Not much yet. Not expecting too much either. When i do bypass from the grid it works perfect. Charger seems ok. I am only doing 25amps as I am using a 8/3 cable with a 30 amp generator plug and breaker. It switches instantly when I turn off grid power...

Oh yea. Thanks.

Sorry there was more. It did come back on after a min. I also got some strange ground to neutral voltages. From 0 volts which is good. Then 26 volts then at one point it was like 68volts. Also the line to ground is typically 120 with load. It was low like 15-20. Maybe there is some capacitors...

So I am a little confused and may have an issue. Maybe not… I just contacted SNRE. Will see what they say. In bypass mode everything seems to be working ok. In battery mode it seems ok with a small load. I put a 750 watt heat Gun and it seemed ok then when I turned it off, it tripped the inverter

Oh and I paid like $1650 us. I was in early. They dropped the prices a couple of times since. I also had to wait. The Chinese holidays and something about production delay with the ground. See picture. So they threw in like $50 in wire and mc4 connectors. I am still hopeful. I like the display...

I am still working on it. I did get the output AC hooked up without load. I have it connected to my 30 amp generator back feed plug. Charged the battery a little. I just put the ground rod in the ground and connecting that tonight. This is way bigger than my 5.5kw system and doing everything...

Good question, I have not put it all together so not sure about pass through. Will let you all know when I get there. I need to run a larger wire. My other one was just 5 k so need to up the wire and breaker. I could just test it with what I have to see. Either way will keep you all posted.

Well I do not want to get too excited but I think they have the ground thing worked out. I took AC Voltage to well everywhere and they all read correctly. I have a bunch of pictures but will show the neutral to ground and neutral to chassis ground and a split phase. But they all look good. Let...

Well I hope it is fixed. ?I will still be careful.

Here is what the manual says.

Hhhmmmm interesting. There was a delay in shipping they said (see image) something about the ground wire. Maybe they fixed it? I can only hope. Did you get far enough to see if it actually does 10k?

Here is a couple of other pictures. The menus is still mostly the same as all the MPP and other Chinese clones. More options it does lithium as well. I can’t wait to put it together.

I just received the SNRE ASF48100U200H. It is supposed to be a 10k split phase inverter. See pictures. I paid a little more than I wanted but if it is what it says it will be worth it. That is still to be seen. I will say it is bigger and way heavier than my 5.5k Chinese clone. It says it does...

Another side note. Has anyone seen the pricing? It may be 100 for 2 cells $250 for 4 $700 for 8 why would you spend more per cell just order more quantity. Unless it is the pairing or something. That is kind or what happens with the 12 cells for $6 the 4 price was $7 the 8 price was $250 the 12...

So I went a little crazy. I bought what said 12 cells for $6 x 2 so $12 for 24 230 AH cells. I am expecting a package of buss bars / or some crazy leaking cells that look like a balloon or something. Lol. I also got 8 of the $20 310 AH cells they both say they have shipped the next day. I bet if...

Lol yea right… ? it is much better now. Well, ok a little better. It is hanging off the side… I am about to redo everything and get it all enclosed.

I realized that you scratch the tab to see the code from varicore. I do not think I ever removed the black on the top or if I did there was nothing there. I am sure they are rerapped grade B cells. They have never went to full voltage or at least held it. I have been using them for about a year...

I am not sure if the open the case comment was for me or the last post. I did… see higher up. Including the pieces of stone. A quick note I used heat to heat just the top edge and break the seam with a couple of flat screw drivers. It seemed to work ok. I saw someone else freeze the whole...

Oh those are 310 ah next to them. They look huge compared lol.

I did. So I got the batteries out. They are catl FFH275 wh batteries. About 85 ah. They do seem new as they pulled that and have bar codes. So a little reflection. Justification… acceptance…. what are the stages of grief. Lol. Which one have I hit? I ended up paying $383 originally and $306...

I was trying to figure how to do that but does not seem that I can. I did post the photo under the comments.

So the rest of the story… I won the appeal but may have lost the battle. I got $153.48 back out of $770 +/-. I opened the battery now that it is done. It had rocks in it. Well granite or quartz pieces in it to weight it down some. What crap. The only thing I can hope is that they are at least...

So quick update and do not want to jinx myself, but I went through the dispute and looks like AliExpress is saying I will get $153.48 back. I was going for double that. I did have to do a couple of videos of the start and end ( not the entire time) and the agreed the batteries were not to...

I have tested the 310 ah ones I got and looks like about 280-290 on the 2 tests I ran. I guess I am ok with them. I do not see much swelling. Maybe 1 or 2 are a little. I just have them in service now so they just run. No issues but am keeping them in a safe range. AveRage Joe had some Ruipu...