Search results

Thank you, I will try to charge individual cell to get them back on top, would you change any of the settings, they’re basically factory default settings, I haven’t changed anything. And when do you configure the shunt?

I have stop charging for now, and I’m not using the inverter to charge, because I haven’t completed my Solar set up, i’m just using one of them chargers from signature Solar, I was just checking to see if all the cells were good and if the Batrium is working right. I might be going at this all...

I’m not what you mean about SOC, if your meaning the state of charge when I started out, they where about the same, about 3.58 to 3.73 from the lowest to the highest, and probably should had them all paralleled so they would had time to get to know each other before I started to change them.

I’m using SPIM08HP 3.7v 16AH cells in 15P x 14S configuration from Battery Hookup. And yes everybody can fuss about me using these batteries, but it’s what I got.

Can someone help me with my Batrium setup, my cells seem to be a little out of balance, I may not have the parameters right or something, I have a few cell over there limits and they just seem to go up and the other cells haven’t caught up.

Thank you again, a lot of help, great video! If I’m doing this right, where you would put in your capacity, each of my cells are 8.5 Ah and there’s 30 in parallel, I would in 255Ah, if that’s right?

Thank you, it works, got it downloaded and updated. I have to finish my wiring and install the core back in the box and plug everything thing in and go from there. I haven’t found a really good video on the WatchMon Core with the CellMate K9 yet.

No security risk that I can see, doesn't seem to do nothing when you click on the link and yes V 2.17.15 and I tried 2.19.9 earlier release.

I have a Batrium Core, I need some help, I can't download the program that run Batrium, I have three computers and none of them will download the software. I have been working on this for hours, can't seem to get anything to work. Please help a computer idiot!

Do you think eventually I could took all 3 48v pack together on one inverter? And how do I figure out how big of a main fuse do I need on 48v pack? Or am I overthinking it, I figure each main battery cable needs some kind of protection. I built performance cars I’ve got fuses on everything.

100p14s, an each cell is fused with 5 amp glass fuses, I did build them similar to the Tesla Pack, mainly watching YouTube videos like average Joe and a lot of others. There wasn’t much to do between all this Covid stuff and cancer. I’m using the Batrium WatchMon Core with the K9, and thank you...

Each cell is fuse with a 5 amp fuse before the bus bar.

And I know now I have wasted a lot of money Messing around with the cell, but I would like to see them work a little bit.

What do you suggest to test these batteries, the one bank of 18650s 14s100p is brand new cell, LGDBHE41865, I tested each one, all were around 2600 to 2690, they are getting to be about a year old. I see people testing as a module of batteries with like a icharger x6 to see what each module...

I’m not sure how to calculate the capacity of the 18650s, haven’t gotten everything finalized, the 18650s is just what started with last year and just finished putting them into packs and gotten hung on the wall. The SPIM08HP modules are originally 36v, you have to rearrange the cell to build a...

I already have two banks of 18650 14s x 100 batteries, with a Growatt SPF 5000, and I just got 7 modules of the SPIM08HP batteries from Battery Hookup that you can build into 48v 12.76kWh module Can I took all of these batteries together into the same inverter or do I need to purchase another...

I would like to buy at least one K9, thanks, James

I meant to say it a while ago thanks guys for all your help today

I was going to put switches for each string at the panels in case I need to work on them and a combiner box at the inverter in case I need to shut down a string in case of over voltage if that make sense, it’s Alabama, The temperature swings a lot here, unless you have other thoughts

Growatt 5000W Solar Inverter with MPPT Solar Controller Input PV max 450V Output AC220V Work with Battery or Without 48V Battery(Growatt 5KW ES Inverter https://www.amazon.com/dp/B09716V4SX/ref=cm_sw_r_cp_api_glt_fabc_V0C6WK9FW0F5S7Z81TVS

I meant the wire between the switch and the inverter, it will be in conduit.

I’m using the Growatt 5000W Solar Hybrid Inventer.

What’s the difference between AWG and THHN wire?

Thank you.

I’m sorry, I would say 15 foot, the panels are mounted on a roof of a dock building and the switch is mounted just under the roof line.

130 Feet between the switch and the inverter

https://www.amazon.com/dp/B07S499XRF/?coliid=INROEVNT4LMIK&colid=13YDPD1K940QP&psc=1&ref_=lv_ov_lig_dp_it#:~:text=Submit-,Industrial%20Control%20Direct%20DC%20Disconnect%2025%20Amp%204-Pole%20Nema%204X%20Enclosed,-Brand%3A%20Industrial%20Control

I need a little help, I'm a beginning so bear with me. I have 6 solar panel wired in series to a switch, from the switch to the Growatt inverter is about 130 feet, how do I now what gauge wire do I run for DC, the panel are 250w, 37.6v open circuit, VMP 30.3, at 8.27 amps, in series (if my math...

Thanks, So far on whether have a Batrium

Is there alternative to a Batrium BMS, I have 14s x 200 18650 battery pack and Growatt 5000, and ABB SACE S5 switch. It seem to be a Batrium at 900 dollars or a Chinese BMS at 100 dollars and not even sure that you could get a Batrium right now in the US. Thanks, James

Do you have a combiner in mind or build one?

What about wire size running 24 panels in a 6S4P, I like that idea, especially if you lost a panel. And what about lightning protection?

Thank you, I thought my math was right, I'm just overthinking, but that sure is a lot of panels. I will probably run 20 panel in series and parallel, and go from there, thanks, James