diy solar

diy solar

Search results

  1. Range

    Inverter's fan running

    Thanks a lot
  2. Range

    Inverter's fan running

    Thanks but wat temperature will a 10w phone charging push to the inverter that will make the fan run whereas only 115w freezer load will not.
  3. Range

    Inverter's fan running

    The fan of my 3000w standalone inverter will not blow when 115w freezer is working but the moment one of the following : phone charger, tv or stand fan is turned on along with the working freezer, the inverter fan MUST run. Why pls?
  4. Range

    Do I really need a bms?

    Not money issues just hate following d crowd with proper reasoning. What type of lithium ion bms will b ok for d set up i mentioned above pls? Waiting for u...
  5. Range

    Do I really need a bms?

    Well said!!! What of a 150 cells at 3s 50 cells(115a). How will a bms disconnect a pack of 50 if just one goes of balance?
  6. Range

    Do I really need a bms?

    What about using the right charger at a set voltage e.g lithium ion or LifePO4 at d right settings with a bms - 12.4v and 13.7v respectively? Personally what i feel is the best is an active balancer. Battery won't go out of balance if u dont overcharge, overdischarge, over pull current during...
  7. Range

    Pv cable 12v system

    I monitor dem. Yes. By d way dey are premium Samsung cells
  8. Range

    Pv cable 12v system

    3.7v 342 pieces 60 psc in parallel den series at 3s( 180 psc) 54 psc in parallel series at 3s ( 162 psc). Both now in parallel
  9. Range

    Pv cable 12v system

    I meant to type what not watt
  10. Range

    Pv cable 12v system

    Ok thanks a lot
  11. Range

    Pv cable 12v system

    Battery is diy built I put d prob on two terminals of d pv terminals i got same voltage
  12. Range

    Pv cable 12v system

    I dont know d watt of d 2 big cracked panels d spec label is missing.
  13. Range

    Pv cable 12v system

    Is it not same as watt my cc is displaying right now? Pv: 38v 111w fluctuating though battery is almost full--- 12v lithium ion ( full at 12.6v). Battery voltage now is 12v with fridge of 137w connected now
  14. Range

    Pv cable 12v system

    Thanks a lot. Please how do I go about d voltage drop
  15. Range

    Pv cable 12v system

    I meant the amp. The highest output I seen was 260w from all 3 pv
  16. Range

    Pv cable 12v system

    Wondering why I didn't get heat with cable if it cannot handle 20a. I have seen 20amp b4 without being warm. Am only asking all these questions to see if I can get higher dan dis during bright days or just to leave an already working system.
  17. Range

    Pv cable 12v system

    It cannot output dat with my present panels
  18. Range

    Pv cable 12v system

    Cable of d inverter is different from d set up. Cc is 60A Powmr, max is 720w at 12v. Max volt 20-80v
  19. Range

    Pv cable 12v system

    Yes 1600w 12v Wat is d best
  20. Range

    Pv cable 12v system

    There are 3 panels 2 of which i cannot determine d wattage bc d label is peeled off but they are bigger dan my 190w panel. The 2 of dem are bifocal. Total voltage displayed by my cc after connecting all 3 pvs is above 39v. I v a pure sine wave inverter and an mppt cc.
  21. Range

    Pv cable 12v system

    Will 6mm² do the job? In dis part of d world we use mm² rating
  22. Range

    Pv cable 12v system

    But why is cable not hot despite d 20a passing through?
  23. Range

    Pv cable 12v system

    20a on my cc Ethernet c It contains 8 strands ( I used 4 each as terminals). Used from pv to cc. Then complete 8strands each from cc to battery.able 24awg×4P 70ft from pv to cc Cracked pv label is peeled out (2s) + 1pv 190w. All 3 pvs are 2s(cracked)1p 2s pv 38v each 1s pv 40v
  24. Range

    Pv cable 12v system

    20a on my cc Ethernet cable 24awg×4P It contains 8 strands ( I used 4 each as terminals). Used from pv to cc. Then complete 8strands each from cc to battery.
  25. Range

    Pv cable 12v system

    My cable is not a regular cale for pv but it is working. I want to know if in need to upgrade it or not as the highest amp i v seen is about 20A. The cable is not hot. Will I get more amp if i change my cable to a bigger one since 12v system requires large size of cable? Note: MY CURRENT CABLE...
  26. Range

    LifePo4 not charging well.

    My active balancer was newly installed. All cells now fully at 3.62v each. Thanks to everyone who assisted me eventually.
  27. Range

    LifePo4 not charging well.

    To a large extent as d 3.37v stuck cell has gone up to 3.45v after discharging the cells with higher voltage. Though all cells are not fully balanced, no cell has gone below 3.42v. My active balancer is ready for pickup.
  28. Range

    Bluetooth module only for LifePo4

    By the way Bob, I cant find this anywhere? Can you share a link pls?
  29. Range

    LifePo4 not charging well.

    On its way Thanks
  30. Range

    LifePo4 not charging well.

    Higher cells discharged by the bulb worked. Thanks Mike. Will still update u as it unfolds.
  31. Range

    LifePo4 not charging well.

    Ok thanks a lot Thanks to everyone who replied.
  32. Range

    LifePo4 not charging well.

    Bus bars, terminals, lugs are still fesh. Will check if discharging the high cells fail.
  33. Range

    LifePo4 not charging well.

    Wow!!! Will try it out and get back to you.
Back
Top