Search results

I have a Tr16 Battery Monitor from Ali and I bought an Sok 12 volt 100Ah battery. What should my voltage sets be for capacity? Top voltage and low voltages info please. I am lithium noob

Thank you very much! That is what i wanted to know!

Ok yes! So my charger will stop when its done charging with the settings you recommend. So once it hits the float stage it will only supply current for 15 seconds and just shut off again? So basically stopping charge automatically? Im bad at asking questions lol

I posted before but want to post again because im an idiot lol. I have an outback Flexmax 60 Amp Mppt that I want to hook up to my new Sok battery. The charge controller has to be set manually for things such as charge voltage, absorb, bulk, float, equalize, etc. Basically want to know how to...

So in short. My 12 volt battery should be charged at 14.6 and all other voltages should be the 14.6? No float time should happen. and only 5 mins of absorbing should occur? And no equalize? As long as that is all done I should be good to go yes? My main concern at this point after the battery is...

Trouble understanding how I should stop charging. After I have set all the setting recommended by you what do I have to do to protect my battery if im not around during the charging process? It will be charging from solar while im gone most days so all I want to know is if it will stop charging...

I tried looking around but I was only finding 24 volt configurations and Im 12 volt. I will keep searching however

I have not. I am trying to get all my information together before hooking it up. I have gone through the settings and found everything i should change. But im still concerned of how i should deal with stopping charge when its full. Will my Mppt do this? As I said I am a complete novice when it...

Is there an mppt that can do this automatically and not require constant monitoring of the system. Id like to be able to live life lol.

What do you mean set absorb voltage to same voltage? 14.6?

I also want to add that my fm60 Mppt charge controller is very manual and you have to set charge voltages, how long it charges in absorb and float. Pretty much everything. Also want to add that i bought the 30 dollar battery monitor that was recommended for lithium. So I should have everything I...

Hello. I am very new to the lifep04 batteries and have recently purchased an Sok battery per Will's recommendation. I have an Outback Flexmax 60 amp Charge controller and 3 Agm batteries currently. It took alot of digging to find the proper setting for those lead batteries and I'm even more...