Search results

Page 24 of the Deye 8K PDF, recommended breaker size from Deye is 63A.

?

No, is not that simple as wiring a Neutral wire. The Circuit board was reversed engineered to implement US Split-phase support.

That's just the 5K & 8K only. There's no US version of 16K available anywhere in the world period. BTW, authorized Deye distributor is not allowed to ship US Split-phase products to the USA. Deye tracked the Serial Numbers of the units and know where the units come from, they have a kill...

Original 16K Single-phase EU 230V from the factory Reversed Engineered 16K version 1, implemented native US Split-phase 120V/240V 60HZ with hardware modification with OEM UL certified components to provide system Neutral, while maintaining factory Single-phase EU 230V. User configurable...

Greeting All, Everything is humming along. I've ditched the somewhat limited 5KW 120VAC only Growatt Autotransformer and have successfully Reversed Engineered the 16K, this early spring. I just hated the low humming buzzing noise of a traditional transformer. The 16K is operating in UL1741 US...

Hi All, Two 8K sold and 1 unit available in early October '23. Please PM if you have any questions. Thank you.

https://www.ebay.com/itm/404349288000?hash=item5e25187e40:g:09sAAOSwk2dkl2c1&amdata=enc%3AAQAIAAAA4M1B9L3nnz4HsjsaP8vTh3A%2B1kxUfPJEZyGloqKC6ttDQZwj8oYN3rvwlWr7lAy42F3vAZAdmKA5ns6gFmvDlYPsfoprCp%2FvB5Mz3H9Rt%2BaSiDRBK31crD8Z0ml%2Bl241qoURonWoeKHwm5AkxnyZU4S35d9uxkR7ao3ngxtn%2BiyFOHwi21qi2WZMhtsIh...

Hi All, One unit is sold and 2 more available. Just lowered the price to $3,400. These US version are hard to come by. Grab it before its gone. Item is listed on Ebay. PM if you have any qestions. Thank you.

I have 3 units, 1 Sold 2 of the Deye 8K-SG01LP1-US Split-phase 120V/240V 60HZ with UL 1741 Certification and here's the details. . Functional equivalent to the Sol-Ark 12K, from the same factory that manufactured the Sol-Ark products. . the units were pampered in 24x7 AC at 72 degrees...

I guess competition is healthy. Price is dropping according to the not so [CONDIFENTIAL] Q3 price sheet ?

At least Deye has an honest product naming convention and not with a fancy slice of hand. An 8K is 8KW and a 16K is 16KW. No monkey business and no need to read the datasheet to figure out being short changed. James is learning fast from his Plano TX neighbor with its 18K PV, Exclusive...

Sol Ark 15 != Deye 16K, you got your facts wrong. Check the specs. The Sol-Ark 15K will only output 12KW on the LOAD output (UPS/Battery), while the Deye is 16KW. This my 16K OFF-GRID, the LOAD in this stress test were generated by the following. 1. L1 + L2 Level 2 EV charging on 240V 2. L1...

For everything else, there's MasterCard ?

The question is how much are you willing to pay for one if it exists?

Buy it for $8,250.00 Buy it for $5,599.00 Buy it for $2,628.00 There's always a cheaper and more capable option if you look harder, beyond Plano, TX to their supplier in Ningo, China ? But then, this is not for folks that needs hand holding, UL 1741, and blah blah.

Glad to hear this helps you in your setup. That's what this forum is for the DIYer sharing experiences and helping each other. ?

The 16K was purchase with the idea of replacing the pair of Parallel Deye 8K Split phase with 51.2KW of LFP Battery backup. When I initially sized up the LFP battery based on 3 days of backup on the assumption of 3 days of cloudy days. With the 2022 Heat Wave, the battery run out of juice and...

Greeting All, Thanks for those that have been following this unboxing and installation of a Deye 16 Hybrid Inverter at 1/3 the price of it's half brother the Sol-Ark 15K with an equally as powerful and reliable hardware/software alternative platform. More bang for the bucks and great for...

With the latest 16K Firmware, the option is in the last page of the "Advanced Function Menu". This do us no good if you have an "older" version of the IO circuit board. Pilotdrh has posted earlier in the thread, Deye does provide an option of replacing multiple circuit board at your own dime...

This HOWTO was originally posted in this forum. ******* Deye 16K & SunSynk ~ Neutral/Earth(Ground) Bonding in "Signal Island Mode" HOWTO ********* The documentation from Deye and SunSynk has done a pretty bad job in describing how to perform a Neutral to Earth/Ground bonding when the 16K...

The documentation from Deye and SunSynk has done a pretty bad job in describing how to perform a Neutral to Earth/Ground bonding when the 16K Hybrid Inverter is operating in "Island Mode" (When GRID is disconnected) and needs N/G bonding. Keith from SunSyn has posted a YouTube video that...

If you need both, then you'll be on Dr. Evil's island, while in Island mode and back feed current back to the down Grid and fried the line worker that is slow to restore the Grid power ???

Here's the answer, from our fav. Brit Keffy using a contactor. Wiring a contactor After much digging around the PDF, the Gen-Start Dry contact signal 7,8 on the Function Port are used for the Neutral/Earth bonding signal, if the "Signal Island Mode" in the Advanced menu is Checked. The...

The current model of the 16K com board DOES NOT have pin 19,20 for 230V ~ to drive an external relay for Neutral to Ground Bonding. The confusion arises from the documentation screen shot attached, that referenced the word "ATS" (Auto-Transfer-Switch). If you read carefully between the...

Are your batteries are from LifePower.solar ? If it is, their pics show it works with Sol-Ark and it should work with Deye. After all their are brothers from a different mother ?

Find out from your Battery vendor Taico, if their BMS is implemented with a CAN Bus or Mod Bus protocol and if is compatible with the Pylon BMS protocol. If it does, the Li Batt setting for CAN Bus = 1 and Mod Bus = 12.

Finally, Inverter and AutoTrans mounted onto the wall and completing all wiring. I installed 107KW of Battery + current 2*Parallel 8K with 51KW, with a total of 158KW on demand ?

Yes is does, not a problem after all US grid is delivered as Single-Phase with a Neutral

Here in the US, the N wire carry 0 Voltage and Expensed/Returned current from the 120V L1/L2 leg of the circuit. Per NEC (National Electrical Code) code compliance, all main entry service panel are required to have N and Ground bonded. The N to G bonding are provided by a Green color screw...

Because they can and they will, suppress the OEM manufacturer from marketing a generic OEM version. ???

The max is 60V on the voltage input screen.

BTW, latest model mod will now support 125A*240V ~ 30KW, is on custom order basis ! ???

You can't mix and match different type of battery. It support low voltage <= 60V, you'll need the 30K and up to support HV (High Voltage) batteries.