Search results

Very good points I was looking at it but did not do the math or compare to their current batteries.

So far I'm about 200+ days now with two JK's with no problems and keeps them balanced pretty good.

Seems someone recently did a review (YouTube) on one of their solid state battery device. Seems like a nice form factor for the watts available.

I'm running dual 6 awg silicone fine strand cable no issues but not many times I'll be pulling max current. Plus the runs are not crazy long. https://www.timshelnut.com/Electronics/Portable-Power-Station-Banana-Dos/

Can't go wrong with an ICECO! All this heat we have been having and previous summers mine has been running 4years straight in my car on a Solar power station I built with 280ah cells. I have VL60D dual zone run one side as freezer with icecream and the other as fridge.

I was thinking Bi-facials if I was to build one. It was something I was thinking about doing in the near future on the back of my house.

Looking into this also as I'm having issues with getting my inverter on with the precharge. I'm currently at 5000 milliseconds on the short circuit protection I'm afraid to keep going up on it. That one statement that the inverter relay isn't compatible doesn't make sense how would this be...

Curious here also which I'm trying to turn on inverter with precharge. Samlex ntx-2000-12 inverter with 60w 6ohm resistor holding it longer than I should once I flip on my 250amp relay it will be on for few seconds and disconnect. History log shows its the short disconnect. Crazy to think...

I had to end up using all MRBF fuses whereas a Class T would have been optimal. Mine issue is due to space and was no logical way to place one in there. If you can do the main with class T and any other runs with the MRBF but not a ANL. But the main question is size and one key...

I have their DC box and did some modifications to it. I would say for the price it was ok and I probably could not have built it like from a project box and parts for what I paid. https://www.licitti.com/product/dc-control-box/ Mine - Added different SB50 plug for input (Yellow) and added the...

I'm also wondering how the temp code works. But early on with people having issues with the pass codes I never fooled with mine. It is not worth it. I do not see that many people hacking into your BMS to do something. If you monitor it look over settings every now and again maybe just...

Love the BLM we do not have this over on the East coast and when I go to the West (Colorado) for some nice trail runs I respect the wilderness and the BLM's. In July I'll be back out there in a Van hope to find some good spots that the van is capable of getting too. I will be taking my...

I don't have any input but just love the massive solar farm on that beast lol. I would end up trimming around the sides with some plastic piece with vents for cosmetics really other than that I think a fairing would be good to have on the front.

Well his last video made me cringe a bit. But they will learn as they go with this build and the solar setup is from Harbor Freight and inverter along with two generators. Just an update.

I have been needing just one EVE 280 but they started selling them with different post so therefor it will not work with my battery pack. I would say a grade B would fit right in with my other cells. I just have this one cell that is not performing well and pulling the whole pack down...

So far my two JK's have been running pretty good.

yep verified this also the other day.

Sounds like its time to move away from an Motorola phone lol.

Some I got from recommended vendor on Alibaba at the time. I can not recall whom at the moment. Photos of them are at the beginning in this Gallery. Gallery

I'm loving my CATL Cells from Docan so far. The EVE ones I have one of the 4 is weak and is causing low voltage cutoff when high amps are pulled from it. It has been an issue for some time and so I ordered the 4 CATL cells replaced the EVE's in the solar generator. Planned to build another...

https://en.wikipedia.org/wiki/JST_connector

Just make sure you buy the Victron from a reputable company as you can not go direct to Victron with any issues you end up having to go through whom you purchased through.

What are you using these for. Sucks these did not work for you there doesnt seem to be a lot of 12v items in this category.

Thanks for adding this update as I've been searching for a few solutions as my JK BMS is having issues when I go turning on my Samlex inverter. I have a portable setup and only need the inverter time to time so I also do not like the parasitic draw and like having it off until needed. Due to...

So much to love here awesome job they look really great!

Yet you make it still dificult to decide lol

I am still concidering one of these two myself for backup charging my portable setup. Would be great to even mount it in my Aux battery build to my main solar generator. At the same time I think having one of these just mounted in the car with the car's solar running through would be better...

I need to get mine hooked up but with my current project load other things are prority at the moment so maybe next week I will get to hooking mine up that I just received.

That sucks with no reply! I've ordered from them with no issues but never needed to contact them. Good to know!

That is odd I have installed it on two Android phones so far I am new to these JK BMS's and about a month ago got my first one up and going and the 2nd one soon to be fired up.

Yes it seems that way because mine was not US stock the screen came in the 5 days but the BMS came yesterday and I ordered mid Feb.

Running 4.11.0 on mine with now issues but that is on Android 12.

10-4 be a little bit getting to that point but I have not notice any of the above on my current one on the main battery pack. I rebuilt my unit took out chargery and replaced with a JK so I received it I think before winter. So it seems at least Q4 2022 on if ordered direct the units should...

I have a new one that should be here any day is there anything I can look for to maybe verifiy anything or there should be some sort of test that is needed to be performed?

For post I have been using some from here and they are reasonable https://vtewarehouse.com/content/electromech/PDP/power_posts.php