diy solar

diy solar

Search results

  1. M

    solar disconnect issues.

    did I need to run neutral wire jumpers from the service disconnect busbar to the service pole busbar as well?
  2. M

    solar disconnect issues.

    plus I'm not backfeeding at the moment I'm just powering each leg of my panel with the mains shut off
  3. M

    solar disconnect issues.

    is there anything that can be done or do I have to get new inverters
  4. M

    solar disconnect issues.

    I have 2 EG4 6500w inverters running 120v to each leg of my breaker panel. inverters are set to 120phase and have them reading as 2p1 and 2p2 with battery as main power source. each line goes to a 60Amp double pole breaker. all wiring is to code. this system is powered by (5) 48v 100ah lifepo4...
  5. M

    sungoldpower 24v 6000w pure sine split phase no output

    I found out that my jet pump had got locked up and wouldn't turn and caused high voltage to trip inverter. I have the inverter giving an output now but it surges on/off now.
  6. M

    sungoldpower 24v 6000w pure sine split phase no output

    I changed both breakers on the inverter and I'm still getting nothing from the inverter. there is nothing wrong with service panel breaker. the inverter is giving no output. I don't see any burned wiring. I don't see an internal fuse either. the inverter turns on and has power showing no faults...
  7. M

    sungoldpower 24v 6000w pure sine split phase no output

    that is the one I found. I definitely will find the reason but I need it operational first.
  8. M

    sungoldpower 24v 6000w pure sine split phase no output

    it should be. I have to get my receipt. I will call them tomorrow as they are closed today. Just in case, do you know of a good company to buy a breaker to use as a replacement.
  9. M

    sungoldpower 24v 6000w pure sine split phase no output

    looked on ebay but didn't see this one. I don't want to buy a cheap knock off.
  10. M

    sungoldpower 24v 6000w pure sine split phase no output

    if it is the breaker are those easy to change out or does it require special skills. I've worked on circuit boards somewhat in my past but more leisurely than professionally
  11. M

    sungoldpower 24v 6000w pure sine split phase no output

    its stays tripped with the inverter off and no load
  12. M

    sungoldpower 24v 6000w pure sine split phase no output

    I'm thinking it's an internal fuse. I will tear it down and give a follow up.
  13. M

    sungoldpower 24v 6000w pure sine split phase no output

    I have a 24v 6000w pure sine low frequency split phase inverter. I have a 3hp air compressor pump that blows air down my well casing running on a 3/4 hp motor with my wheels being sized properly to support a low air pressure driving from the belt. this fills my water storage tank. I have a 1/2...
  14. M

    eg4- 6500ex-48 charging issue.

    I have (2) eg46500ex paralleled together. I have them set on 2p1 and 2p2 and both are set to (user) for an open loop system. I have (4) lifepower4 batteries. The issue I'm having is that both inverters will charge my batteries andthe inverters are showing full amperage and voltage coming in...
  15. M

    Eg4 6500EX current sharing cable

    I forgot to switch the dip switch on my old host battery. so I had 2 hosts. I changed dip switches and all is well
  16. M

    Eg4 6500EX current sharing cable

    I had 3 lifepower4 batteries running fine on the closed loop system. I got a new one a few days ago. I charged the new one to full then added it to the lineup and now I get the 61 fault code
  17. M

    solar panels proper volts but not watts?

    that's what I thought. batteries are full and load is just the inverters idling.
  18. M

    solar panels proper volts but not watts?

    I also am doing this test at 5:50 pm but it is still sunny out
  19. M

    solar panels proper volts but not watts?

    I also have 3 48 v 100ah lifepower4 batteries. I have inverters set parallel split phase and using closed loop communication from batteries to inverter.
  20. M

    solar panels proper volts but not watts?

    I have 4 pv arrays 8s 7s going into 2 going into each of my eg4 6500EX inverter.i have 30 panels that are 37v 230w. master inverter reads (8 243 v 56w (7s) 230v 77w. 2nd inverter reads (8s) 200v 36w (7s) 220v 45w. numbers stay close in voltage but watts seem to change sometimes up to 350...
  21. M

    Eg4 6500EX current sharing cable

    thanks will do
  22. M

    Eg4 6500EX current sharing cable

    it came straight off signature solar video on YouTube
  23. M

    Eg4 6500EX current sharing cable

    I'm not sure what you mean to explain. I just set up. the rs485 cables between the batteries like the instructions show and changed the dip switch to a host for one battery and the other 2 batteries to different positions then connected the battery/ inverter read cable to the port on the...
  24. M

    Eg4 6500EX current sharing cable

    I have them set to a closed loop system. Eg4 for the host and use for the other batteries. I am running no load on them for at least 2 days of full sun other than the inverter running load
  25. M

    Eg4 6500EX current sharing cable

    thanks. appreciate your time and help
  26. M

    Eg4 6500EX current sharing cable

    2p1 host 2p2 180 for the other
  27. M

    Eg4 6500EX current sharing cable

    I read the manual and don't understand. I'm asking someone to give me an answer I can understand
  28. M

    Eg4 6500EX current sharing cable

    I'm running my 2 eg4 6500EX parallel and completely off grid. Are the current sharing cables necessary
Back
Top