Have been looking for some recommendations on settings for a newly purchased 1012LV-MS connected to a single SOK 206Ah 12v battery. From looking at will's recommendations and some other threads I feel I have a close idea but would be great for some recommendations from experienced users.
One thread posted this article which was a great read.
1012LV-MS
Main settings I'm looking for suggestions on would be 26,27,29. Apologies if this topic has been covered at length and my forum searching abilities are lacking. Big purchase for me and am hoping to not damage the battery. Thanks in advance.
All-in-One 12/24/48V Packages
MPP and a few other manufacturers now sell a "complete off grid system in a box" that has: AC Inverter Solar Charge Controller AC Battery Charger Automatic Transfer Switch (if grid power is...
www.mobile-solarpower.com
Mpp Solar 1012 w/BMS
I setup my 1012 with a 200ah pack and a BMS. I am noticing the BMS is reporting different voltage than the all-in-one. This is a problem as I am not getting good charging of my battery. Has anyone had this issue and know how to fix it?
diysolarforum.com
One thread posted this article which was a great read.
How to Find Happiness With LiFePO4 (Lithium-Ion) Batteries –...
By: Rob Beckers You have just sold your first-born into slavery, remortgaged the house, and bought yourself a lithium-ion battery! Now you want to know how to take care of your precious new purchase: How to best charge lithium-iron batteries, how to discharge them, and how to get the maximum...
www.solacity.com
1012LV-MS
Main settings I'm looking for suggestions on would be 26,27,29. Apologies if this topic has been covered at length and my forum searching abilities are lacking. Big purchase for me and am hoping to not damage the battery. Thanks in advance.