TheDan
New Member
- Joined
- Oct 24, 2021
- Messages
- 25
I will try to keep this as concise as possible while trying not to omit any relevant details. Since this is my first solar build I appreciate any advice or insight you might have!
I will have two SolarCity H6 inverters and each inverter servicing 2 strings of 8 panels (2S8P I believe).
Here are the details for the panels and inverters:
The PV input specifications of the SolarCity H6 inverter are:
• Nominal Voltage: 380V
• Max. System Voltage: 570V
• MPPT Operating Voltage Range: 85V to 550V (120V startup)
• Full Power MPPT Voltage Range: 200V-480V
• Max. Allowed DC to AC ratio: 150%
• Max. Continuous Current: 19A per MPP channel
• Max. Short Circuit Current: 26A per MPP channel
• Integrated Manual DC Disconnect: 600V, 30A UL-listed switch
• MPP tracker/channels: two (2)
• Total input strings possible: four (4)
The AC output specifications of the SolarCity H6 inverter are:
• Nominal/Continuous Output Power (L-N / L-L): 3000W/6000W
• Max. Surge Power (L-N / L-L): 3400W/6800W for 10 seconds
• Utility Grid Support: Split-phase, three (3) wire connection
• Operating Voltage Range: 105V to 132V / 211V to 264V (ANSI C84.1)
• Nominal/Continuous Output Current: 25A
• Peak Output Current: 28.3A (surge)
• Nominal Frequency: 60Hz
• Frequency Range (adjustable): 59.3Hz-60.5Hz (44Hz-65Hz)
• Nighttime (standby) Consumption: <6W
• Total Harmonic Distortion: ITHD, VTHD <5% (at nominal power)
• Power Factor: >0.995 (0.8ind-0.8cap; at nominal power)
• AC Overcurrent Protection: 35A
I will have two SolarCity H6 inverters and each inverter servicing 2 strings of 8 panels (2S8P I believe).
Here are the details for the panels and inverters:
Jinko 405W panels | |
---|---|
STC Rating | 405.0 Watts |
PTC Rating | 376.1 |
Open Circuit Voltage (Voc) | 50.1 Volts |
Short Circuit Current (Isc) | 10.48 Amps |
The PV input specifications of the SolarCity H6 inverter are:
• Nominal Voltage: 380V
• Max. System Voltage: 570V
• MPPT Operating Voltage Range: 85V to 550V (120V startup)
• Full Power MPPT Voltage Range: 200V-480V
• Max. Allowed DC to AC ratio: 150%
• Max. Continuous Current: 19A per MPP channel
• Max. Short Circuit Current: 26A per MPP channel
• Integrated Manual DC Disconnect: 600V, 30A UL-listed switch
• MPP tracker/channels: two (2)
• Total input strings possible: four (4)
The AC output specifications of the SolarCity H6 inverter are:
• Nominal/Continuous Output Power (L-N / L-L): 3000W/6000W
• Max. Surge Power (L-N / L-L): 3400W/6800W for 10 seconds
• Utility Grid Support: Split-phase, three (3) wire connection
• Operating Voltage Range: 105V to 132V / 211V to 264V (ANSI C84.1)
• Nominal/Continuous Output Current: 25A
• Peak Output Current: 28.3A (surge)
• Nominal Frequency: 60Hz
• Frequency Range (adjustable): 59.3Hz-60.5Hz (44Hz-65Hz)
• Nighttime (standby) Consumption: <6W
• Total Harmonic Distortion: ITHD, VTHD <5% (at nominal power)
• Power Factor: >0.995 (0.8ind-0.8cap; at nominal power)
• AC Overcurrent Protection: 35A