splitting_lanes
New Member
Who’s using this inverter on 12v lithium batteries (or battery) and having good success with the system?
I have the inverter, currently connected to a 12v deep cycle rv battery. the battery has no BMS that can overload with inrush, so I have no problems other than low capacity.
I‘m concerned that power on inrush may be a problem if I switch to lithium. I’m considering a pair of SOK 100a non-BT or a 200a Ampere time with a 200a BMS. I’m open to suggestions, and neither of these fit as ideally as a single SOK206 would, but I don’t think it’s BMS could handle what the inverter can at peak (2600va).
the threads on here regarding resetting overloaded BMS’s from just turning on an inverter have me concerned.
thanks in advance for your replies.
I have the inverter, currently connected to a 12v deep cycle rv battery. the battery has no BMS that can overload with inrush, so I have no problems other than low capacity.
I‘m concerned that power on inrush may be a problem if I switch to lithium. I’m considering a pair of SOK 100a non-BT or a 200a Ampere time with a 200a BMS. I’m open to suggestions, and neither of these fit as ideally as a single SOK206 would, but I don’t think it’s BMS could handle what the inverter can at peak (2600va).
the threads on here regarding resetting overloaded BMS’s from just turning on an inverter have me concerned.
thanks in advance for your replies.