diy solar

diy solar

14 EnjoyBot 200AH batteries & a Victron 450/200 -- pass the smell test?

Victron isn't listing these batteries as compatible with their Multiplus system unfortunately. But Battle Born batteries which also do not communicate with the Victron equipment have been tested and listed as compatible. So it's possible that these Sig Solar batteries would likewise be compatible, they're just not listed as having been tested by Victron.

 
Last edited:
FWIW I use a Victron 250/60 MPPT and a Schneider CSW 4048 inverter with my old style EG4 battery without using any communication. I did hook up a computer to monitor the cell voltages on the EG4 but turned it off after a few months of continually seeing balanced cells.

Basically, each piece of the puzzle protects itself with proper settings for over/under voltage etc.

No problems, in use 24/7/365 for well over a year now.
 
That's great info to know, thank you much for that. I saw a similar success story with the EG4 and a Victron Quatro over in this thread. I would assume it wouldn't be much different with a Multiplus II. I very well may be ordering eight of these batteries tomorrow...

 
Last edited:
Back
Top