Hi Guys,
I'm wiring up a 3ph connection connected to a 50kWh battery bank, everything works well until I connect the grid to the inverters...
I'm getting error code '16' which is"
"Input phase is not correct" Solution - "Change the input phase S and T wiring"
At first thought I thought S and T wiring would refer to L1/L2/L3? second and thrid?
do you see any logic in this??
I'll welcome any ideas
I'm wiring up a 3ph connection connected to a 50kWh battery bank, everything works well until I connect the grid to the inverters...
I'm getting error code '16' which is"
"Input phase is not correct" Solution - "Change the input phase S and T wiring"
At first thought I thought S and T wiring would refer to L1/L2/L3? second and thrid?
do you see any logic in this??
I'll welcome any ideas
Last edited: