300ah lifepo4 battery cell layout

[FLD]

First off, I'm sorry if this is in another thread. I searched but couldn't find what I was looking for.
I recently bought w Pionergy 300ah lifepo4 battery. It performs very well in our camper and I think it's well worth the $1000 I paid for it.
My questions are about how this battery's cells might be connnected and what it might have for a bms.
The manual says the 8 cells are LF45173209-150AH.
The BMS is indicated as having overcharge, over-discharge, over-current, short circuit and temperature protection, with max continuous discharge of 200 amps, max charge current of 100 amps.
Do you think it has two BMS modules? Or one?

 

[time2roll]

Most likely one BMS and cells will be connected with 4 pairs in series. Otherwise need to remove the lid to verify.

 

[Ampster]

Do you think it has two BMS modules?

Presumably it is a 12 volt battery? My guess is the same as @time2roll . It probably is 2P4S with one BMS.

 

[FLD]

Yes, I forgot to mention it's 12 volt. Duh.
Seeing as our camper went into storage today, I might look into building a 300ah battery. Or I could buy a second one off Amazon. But what fun would that be?