Hi all,
First off, I’m new here. I tried to find this information on my own but I couldn’t…
I’ve been off grid for about a year now. We have a fairly large solar setup. I was doing some unrelated research and found a chart that showed the correct voltage that a charge controller should be set at (bulk, absorption and float) to get the proper charge on our battery storage. I’m concerned mine is not set correctly and may be damaging my batteries.
I have 10x Tesla Model S Battery Modules, 24V, 250Ah 5.2 kWh wired in series to 48v. We use Victron smart charge controllers. What should I have my bulk, absorption and float set at for this?
Thank you in advance.
First off, I’m new here. I tried to find this information on my own but I couldn’t…
I’ve been off grid for about a year now. We have a fairly large solar setup. I was doing some unrelated research and found a chart that showed the correct voltage that a charge controller should be set at (bulk, absorption and float) to get the proper charge on our battery storage. I’m concerned mine is not set correctly and may be damaging my batteries.
I have 10x Tesla Model S Battery Modules, 24V, 250Ah 5.2 kWh wired in series to 48v. We use Victron smart charge controllers. What should I have my bulk, absorption and float set at for this?
Thank you in advance.