Alt-e Virtual Solar Conference
- Thread starter HRTKD
- Start date
ArthurEld
Solar Wizard
First I heard of it. Solark 1pm
I'm in
I'm in
Justin from Victron is going over the new Multiplus that will handle split phase.
Release for the release of the Multiplus II will be Q1 2021. It sounds like 240v inverter power isn't available from battery, but it is available from shore power.
Midnight Solar is OEM to a couple of Victron products.
No BMS from Victron. Probably never.
It would take too much to support.
No BMS from Victron. Probably never.
It would take too much to support.
ArthurEld
Solar Wizard
I got a lot out of the Solark session. They have a new smart load box that can separately program 14 loads. $1500. ?
From the site
Edit: though I can't select today's sessions so I"m not sure if they'll email anything to me.
Edit 2: https://alte-january-2021-virtual-solar-conference.heysummit.com/replays/
ArthurEld
Solar Wizard
It continues until Friday. But Friday costs $90
Justin also said that more of their chargers (AC-DC and DC-DC, I believe) will get bluetooth built in.
Conference Day 2. I'm in the Midnight Solar session on DC Charging.
They tried to cover the topic of mixing solar panels with different voltage/amp ratings within the same string and between strings. They used a couple of slides to explain it. It seems a lot more complicated than that to me.
They tried to cover the topic of mixing solar panels with different voltage/amp ratings within the same string and between strings. They used a couple of slides to explain it. It seems a lot more complicated than that to me.
ArthurEld
Solar Wizard
I attended the Iron Ridge racking webinar. It was good. I'm going to be installing panels soon.
I bet that was a good one. I might have to watch the replay.
ArthurEld
Solar Wizard
I plan to watch the other racking webinars too.
I've never installed any panels but they sure make it look easy.
One trick I learned from that is if you miss the rafter, just use a hanger wire to feel around and find out where it is.
That beats leaving the drill in the hole and looking for it in the attic.
I've never installed any panels but they sure make it look easy.
One trick I learned from that is if you miss the rafter, just use a hanger wire to feel around and find out where it is.
That beats leaving the drill in the hole and looking for it in the attic.
ArthurEld
Solar Wizard
I watched part of the Kilovolt Battery webinar yesterday
It was hosted by Nate Dooley. He's my salesman for the system I am buying.
The meeting had some technical difficulties but I got some good info from it.
I always learn something that makes it worthwhile.
Nate seems like a smart guy which gives me more confidence in my setup.
I always wonder if salesmen know anything about the stuff they are selling me.
It was hosted by Nate Dooley. He's my salesman for the system I am buying.
The meeting had some technical difficulties but I got some good info from it.
I always learn something that makes it worthwhile.
Nate seems like a smart guy which gives me more confidence in my setup.
I always wonder if salesmen know anything about the stuff they are selling me.
Similar threads
