diy solar

diy solar

Always on Bulk mode..

TURN OFF EQUALIZATION ! Never Ever on LFP Cells ! Unless you want to toss them at Recycle

Good catch! ("equalization time 2 hours")

How about "Absorption time 15 minutes" and "Tail current disabled"?
What setting is best?
 
EQ OFF
Absorb Time can be 15 Minutes per 200AH of BANK capacity (not pack capacity) This can be played with BUT with watchful eye because too long and it can result in HVD or worse, allowing Runner Cells to go wild tripping the BMS.
Tail Current = 0.05C of the Highest AH pack in a bank.
 
The Absorb Time defaults to 2 hours btw.

And includes this option:
 

Attachments

  • Screenshot_3.jpg
    Screenshot_3.jpg
    193.3 KB · Views: 3
Last edited:
Back
Top