Don B. Cilly
Energetic energy padawan
I guess if you really don't want to understand... you won't :·/
It's not that difficult, though.
It's not that difficult, though.
Yes.Do I really have to draw you a picture?
What we don't understand is why the solution has been presented several times but you don't want it.I guess if you really don't want to understand... you won't :·/
It's not that difficult, though.
Why do you even need the diode?
Separate cables from scc to battery and battery to load.
Why do you even need the diode?
Sucks to suck then.The solar/AC charger/inverter is an all-in-one...
No?Because without it, the discharge meter wouldn't show discharge when I'm charging. The needle would go backwards.
Exactly. I don't know why there is still any arguing over this. The solution has been presented to the OPer multiple times.That would only happen if you are charging through that meter.
Your loads are still discharging through it.
+1000.Exactly. I don't know why there is still any arguing over this. The solution has been presented to the OPer multiple times.
+1000.The diode isn't some magic solution. It won't do what you think it will
+1000.No?
That would only happen if you are charging through that meter.
Your loads are still discharging through it.
+1000.Why do you even need the diode?
Your load isn't going to backfeed. In fact that diode would do virtually nothing.
I do not think you understand how current flow if your look at your schematic to see how the current flows through the Amp meter connected to the load, I am not the only that's trying to explain to you how it works so far.I guess if you really don't want to understand... you won't :·/
It's not that difficult, though.