Another Epever thread

[pollenface]

I have an issue with my Epever 2210AN and 4210AN where they will not respect USER Boost settings.

I set Boost to 28.8v, Save "Success" .... I get 29.2v during operation

I set Boost to 28.7v, Save "Success" .... I get 29.2v during operation

I set Boost to 28.6v, Save "Success" .... I get 29.2v during operation

I have set "Equalisation" to 0min

Is this a common issue with Ep Tracers? Or is there something I'm missing when setting them (using MT50). They do however respect my Float voltage and LVD/LVR voltages.

I have a 24v AGM bank and am currently running the GEL setting (28.4v) as recommended by others. The battery bank is not heavily drawn upon during the night and the bank voltage is usually between 25.7-25.9v before sunrise.

 

[pollenface]

I sorted this out.

I dropped the Charge Limit to 28.9v and no more dramas.