DerpsyDoodler
Solar Addict
- Joined
- Jan 10, 2021
- Messages
- 2,247
Current dropped to .8a and I disconnected the test. I had the PS voltage set to 3.6. I will let the cell settle for an hour, make note of settled voltage, reconfigure ps voltage to 3.65, reconnect, and top it off. I will then let it settle an hour and check voltage again. I was going to let it sit for a day to make sure it holds, but I think I will skip this. When shipped they measured 3.29 as also measured when received ~45 days later. Not that this couldn’t be falsified. Still, if there are holding problems I think they will make themselves evident (unless someone has something else to say about this).