Any cool Battery Monitor/Info Display panels?

[Quattrohead]

This thing is great.
Interestingly, it is splitting the % charge of my Felicity and DIY batteries perfectly.
The Felicity bank discharges and charges first, then the DIY pair join the party later.
So for example I have seen the Felicity at 80%, the DIY at 90% and the KG160F showing 85%.

It would be great if someone can get the data into SA etc.

 

[Montypaks]

This thing is great.
Interestingly, it is splitting the % charge of my Felicity and DIY batteries perfectly.
The Felicity bank discharges and charges first, then the DIY pair join the party later.
So for example I have seen the Felicity at 80%, the DIY at 90% and the KG160F showing 85%.

It would be great if someone can get the data into SA etc.

SA have directly confirmed they don't support the Juntek shunt and don't intend to in the near future.

This is pretty disappointing but all good. I have decided to just go for another victron shunt and put the Juntek up for sale. Great device, but it's important for the info to be pulled into SA and subsequently Home Assistant so it gets displayed on my home automation dashboard and also allows for some automations based on battery soc for example.

Will swap it out for the victron shunt later this week or next hopefully