Any reason this PSU wouldn't work as a charger?

[northern sun]

I'm in the process of switching my LA system (24v, yes I know I'd be better with 48v) to LiFePo, and I was looking for a couple of battery chargers, that I could leave plugged into my generator input. Ideally I'd have 2 so my load on the generator would be balanced. I haven't seen a ton of good options, but then I realized that the LED drivers that I work with profesionally could fit the bill, as long as I wasn't looking for any thing fancy. These units - https://www.meanwell.com/webapp/product/search.aspx?prod=RSP-1000- can provide me 27v straight. Does anyone see any reason why these wouldn't be able to charge my new batteries to 95% SOC. The control of the generator would be taken care of by my inverter. I realize the inverter can be used as a charger but its 120V only and would be a pretty big unbalanced load on the generator. Thanks in advance

 

[time2roll]

Should work fine if that is what you want. NPB series will shut off or float if that is better.

Powermax PM3 series might be a good value.
https://powermaxconverters.com/product/pm3-24v-series/