Maast
Compulsive Tinkerer
I dont remember reading somebody actually doing it, just a couple of theoretical discussions about it and a search didnt turn up anything.
I'm thinking I'm going to run my 16T through a couple of diodes in series (40v 20A diodes I've got laying around) and an small toriod inductor to connect to the 48v pack. I might do a pair of diodes each on both the positive and negative leads.
The idea is to isolate the BMS main power from any ripple coming from the inverter.
If you've done it, what were your results?
I'm thinking I'm going to run my 16T through a couple of diodes in series (40v 20A diodes I've got laying around) and an small toriod inductor to connect to the 48v pack. I might do a pair of diodes each on both the positive and negative leads.
The idea is to isolate the BMS main power from any ripple coming from the inverter.
If you've done it, what were your results?