• Have you tried out dark mode?! Scroll to the bottom of any page to find a sun or moon icon to turn dark mode on or off!

diy solar

diy solar

App does not work with Neey 4th Gen 4A Active Balancer

R

RockaChic

New Member
Joined
Jul 5, 2023
Messages
33
Location
Sweden
Hi,
I recently bought the Neey active balancer gen 4 but I can't get it to find the balancer with either the Apple ios or Android. Downloaded the app Gewee bms from appstore on APPLE and version 3,1 from Github for Android.

I can find the balancer in Bluetooth settings on Android but the Neey app does not find the balancer. Any idea to revolve the isue someone?
 
It may be that it’s actually there but you need to just tap on the right spot. It’s not going to show in iOS settings(invisible), Bluetooth but actually it opens from the app. hope this helps

From a review I posted on Amazon last year, yes the info from the manufacturer is poor;

There’s a new app for IPhone that allows the
"StartequalizationVol"feature. It has a new
title in the app store"GeeWe BMS" If you
have the old app on the phone you need to
delete and replace, don't update it with the
new one. To change the installed app to
English, open the app, click on the three
dots, then the gear, then the lower line of
chicken scratch, now the circle/English.
Restart the phone and it should now be in
English. To begin: open the app, tap the
three Lines, tap scan, tap on the results/
model on the top left. Now you are ready to
fill out the settings if you have it wired
correctly. When done, tap run and it will go
through testing before running/or till
parameters you set are in range to balance.
If you have the older version balancer, the StartequaliztionVol line simply won’t take.
 
Skypower said:
It may be that it’s actually there but you need to just tap on the right spot. It’s not going to show in iOS settings(invisible), Bluetooth but actually it opens from the app. hope this helps

From a review I posted on Amazon last year, yes the info from the manufacturer is poor;

There’s a new app for IPhone that allows the
"StartequalizationVol"feature. It has a new
title in the app store"GeeWe BMS" If you
have the old app on the phone you need to
delete and replace, don't update it with the
new one. To change the installed app to
English, open the app, click on the three
dots, then the gear, then the lower line of
chicken scratch, now the circle/English.
Restart the phone and it should now be in
English. To begin: open the app, tap the
three Lines, tap scan, tap on the results/
model on the top left. Now you are ready to
fill out the settings if you have it wired
correctly. When done, tap run and it will go
through testing before running/or till
parameters you set are in range to balance.
If you have the older version balancer, the StartequaliztionVol line simply won’t take.
Click to expand...
Actually I can see the app seaching in both Apple IOS and in Android, but neither find the balancer. Light are flashig Blue on the balancer, but nothing happens. ?
 
In the app you actually tapped on “scan”, and no model number shows in the top left?
 
Last edited:
The only time I’ve not been able to connect is if it was already on another device. Perhaps something else is jamming that band(another short range Bluetooth device nearby). Can you move your battery to another location? Other than that, the Neey may be a dud since it won’t fire up on Android or iOS and it seems you have done your due diligence.
 
Skypower said:
The only time I’ve not been able to connect is if it was already on another device. Perhaps something else is jamming that band(another short range Bluetooth device nearby). Can you move your battery to another location? Other than that, the Neey may be a dud since it won’t fire up on Android or iOS and it seems you have done your due diligence.
Click to expand...
The strange thing is, I dowloaded a Bluetooth check app from play store and it did connect and paired with PIN 123456
 
The simple solution was not to buy a new phone, which I did, it was to turn on positioning (location service) in Android. Problem solved,except it is not possible to set Sleep voltage and equalisation voltage. The balanser beeps but the setting disapear.
 
Last edited:
Try these numbers, if it’s in the wrong order, it won’t take. I also won’t save the the numbers if it’s not a 4th generation; IMG_1346.png
 
How can I find out what generation it is except what you just wrote? I paid for generation 4. I can not set start Volt lower than 0,005 I guess I have benen screwed by the company
 
This balancer are the best on the market I have heard, and it really Come to shine when balancing SOK batteries crapy passiv balancer and BMS. EXCEPT for this flows, my SOK batterie are finaly balanced.
 
Last edited:
This is an old screenshot that I found and everything worked back then except capacity could not be set which didn’t seem to effect functionality. I have both old and 4th generation Neeys but neither are currently connected since the Daly bms fail and they have all been replaced with JK bms’s. The Neey is a superior balancer. Looks like you have the latest version. Now I don’t have a clue what’s wrong. I’m wondering if they fowled up the latest app software?
 
You must log in or register to reply here.

Similar threads

W
Neey 4a active balancer "Request device information failure"
Replies
10
Views
243
Wolfpack7483
W
M
Neey active balancer password?
Replies
4
Views
401
Kremer
Kremer
M
NEEY active balancer instructions?
Replies
13
Views
907
hydrox
H
P
Neey Active balancer not detecting voltage on a first cell
Replies
0
Views
157
pfeva134
P
Jalle19
Replaced NEEY 4A active balancer with Seplos built-in passive, results
Replies
9
Views
532
houseofancients
houseofancients

diy solar

diy solar
Back
Top